User Manual

Network Scanning (For models with built-in network support)
209
12
e Press Manual to enter the destination E-mail address.
Note
You can also use E-mail addresses you have stored in your machine.
• Press Phone Book.
• Press to search by Alphabetical Order or Numerical Order.
• Press a or b to choose the E-mail address you want.
f Press d or c to choose Quality.
Choose the quality you want.
If you don't want to change the quality or file type, go to h.
g Press d or c to choose File Type.
Choose the file type you want.
If you don't want to change the file type, go to h.
Note
If you are using the scanner glass of the machine, choose the document size.
• Press d or c to choose Glass Scan Size.
• Choose the document size you want.
h Press Mono Start or Colour Start.
The machine starts the scanning process.
If you are using the scanner glass, the LCD displays Next Page?. Press Yes or No.
Scan to Image 12
When you choose Scan to Image, your document will be scanned and sent directly to the Macintosh
®
you
designated on your network. ControlCenter2 will activate the default graphics application on the designated
Macintosh
®
. You can change the Scan configuration. (See Image (example: Apple
®
Preview) on page 189.)
a Load your document.
b Press the (Scan) key.
c Press a or b to choose Scan to Image.
Press OK.
d Press a or b to choose the destination Macintosh
®
you want to send to.
Press OK.
If the LCD prompts you to enter a PIN number, enter the 4-digit PIN number for the destination
Macintosh
®
on the control panel.
Press OK.