User Manual
Table Of Contents
- SOFTWARE USER’S GUIDE
- Table of Contents
- Windows®
- 1 Printing
- 2 Scanning
- Scanning a document using the TWAIN driver
- Scanning a document using the WIA driver (For Windows® XP/Windows Vista®)
- Scanning a document using the WIA driver (For Windows Photo Gallery and Windows Fax and Scan users)
- Using the Scan key (For USB cable users)
- Using ScanSoft™ PaperPort™ 11SE with OCR by NUANCE™
- 3 ControlCenter3
- 4 Network Scanning (For models with built-in network support)
- 5 Remote Setup (Not available for DCP models, MFC-250C, MFC-290C and MFC-297C)
- 6 Brother PC-FAX Software (MFC models only)
- 7 PhotoCapture Center™
- 8 Firewall settings (For Network users)
- Apple® Macintosh®
- 9 Printing and Faxing
- 10 Scanning
- 11 ControlCenter2
- 12 Network Scanning (For models with built-in network support)
- 13 Remote Setup & PhotoCapture Center™
- Index
- brother UK
Scanning
60
2
h The file name is set automatically. However, you can create a name of your choice using the character
keys on the control panel. You can only change the first 6 digits of the file name.
Press OK.
Note
Press to delete the letters you entered.
i Press Mono Start or Colour Start to start scanning. If you are using the scanner glass, the LCD displays
Next Page?. Press Yes or No. After you finish scanning, make sure you choose No before removing
the USB Flash memory drive or memory card from the machine.
Note
Scan type depends on the settings you choose in step e to g, Mono Start or Colour Start does not
change the setting.
How to set a new default for Scan to Media 2
You can set your own default settings.
For 1 or 2 Line LCD models 2
Changing the default quality 2
a Press Menu.
b Press a or b to choose PhotoCaptu re.
Press OK.
c Press a or b to choose Scan to Media.
Press OK.
d Press a or b to choose Quality.
Press OK.
e Choose the quality you want.
Press OK.
f Press Stop/Exit.