User Manual

Scanning
47
2
e Press and hold down the left mouse button and drag it over the portion you want to scan.
f If you need to access advanced settings, click Adjust the quality of the scanned picture (3). You can
choose Brightness, Contrast, Resolution and Picture Type from Advanced Properties. Click OK
after you choose settings.
g Click the Scan button in the Scan dialog box.
The machine starts scanning the document.
This time only the chosen area of the document appears in the PaperPort™ 11SE window (or your
application window).
Brother Scanner Utility 2
The Brother Scanner Utility is used to configure the WIA scanner driver for resolutions greater than 1200 dpi
and for changing the Maximum Scanning Size setting.
 For A4 scanning models
If you want to set Legal size as the default size, check Legal in the Brother Scanner Utility dialog box. You
must restart your PC for the new settings to take effect.
 For A3 scanning models
If you want to choose A3 or Legal size as the scan page size, check A3/Ledger in the Brother Scanner
Utility dialog box. You must restart your PC for the new settings to take effect.
Note
If you scan the document at a resolution of greater than 1200 dpi, the file size may be very large. Make
sure that you have enough memory and hard disk space for the size of the file you are trying to scan. If
you do not have enough memory or hard disk space then your PC may freeze and you could lose your file.