User Manual

QUICK-DIAL NUMBERS AND DIALLING OPTIONS 5 - 5
Dialling options
Access codes and credit card numbers
Sometimes you may want to choose from several long distance
carriers when you make a call. Rates may vary depending on the time
and destination. To take advantage of low rates, you can store the
access codes or long-distance carriers and credit card numbers as
Speed-Dial numbers. You can store these long dialling sequences by
dividing them and setting them up on separate Speed Dial numbers in
any combination. You can even include manual dialling using the dial
pad. (See
Storing Speed-Dial numbers
on page 5-1.)
For example, perhaps you have stored ‘555’ on Speed-Dial #03 and
‘7000’ on Speed-Dial #02. If you press
Search/Speed Dial
,
#03
,
Search/Speed Dial
,
#02
, and
Mono Start
or
Colour Start
, you
will dial ‘555-7000’.
To temporarily change a number, you can substitute part of the
number with manual dialling using the dial pad.
For example, to change the number to 555-7001 you could press
Search/Speed Dial
,
#03
and then press
7001
using the dialling
pad.
Pause
Press
Redial/Pause
to insert a 3.5-second pause between
numbers. If you are dialling overseas, you can press
Redial/Pause
as many times as needed to increase the length of the pause.
There are two ways to dial. (See
How to dial
on page 3-1.)
If you must wait for another dial tone or signal at any point in the
dialling sequence, store a pause in the number by pressing
Redial/Pause
. Each key press adds a 3.5-second delay.