User Manual
Table Of Contents
- USER’S GUIDE MFC-210C/MFC-410CN
- APPROVAL INFORMATION
- Compilation and Publication Notice
- Safety precautions
- Choosing a location
- Quick Reference Guide
- Table of Contents
- 1 Introduction
- 2 Getting started
- 3 Setup Send
- How to enter Fax mode
- How to dial
- How to Fax (B&W and Colour)
- Basic sending operations
- Advanced sending operations
- Broadcasting (Not available for colour faxes)
- Overseas Mode
- Delayed Fax (Not available for colour faxes) (MFC-410CN only)
- Delayed Batch Transmission (Not available for colour faxes) (MFC-410CN only)
- Setup for Polled Transmit (Standard) (Not available for colour faxes) (MFC-410CN only)
- Setup for Polled Transmit with Secure Code (Not available for colour faxes) (MFC-410CN only)
- TX Lock (Key Lock for some countries)
- Faxing letter size documents from the scanner glass
- 4 Setup Receive
- Basic receiving operations
- 5 Quick-Dial numbers and dialling options
- 6 Remote Fax Options (MFC-410CN only) (Not available for colour faxes)
- 7 Printing reports
- 8 Making copies
- 9 Walk-Up PhotoCapture Center™
- 10 Important information
- 11 Troubleshooting and routine maintenance
- Appendix A
- Telephone Service for Australia
- Telephone Service for New Zealand
- Telephone Service for Some Countries
- Advanced receiving operations
- Connecting an external device to your MFC
- Appendix B
- Glossary
- Specifications
- Index
- Remote Retrieval Access card (MFC-410CN only)
- brother ARL/ASA/NZ
v
Quick Reference Guide
Sending Black & White
Faxes
Automatic Transmission
Sending a fax
1
If it is not illuminated in
green, press (
Fax
).
2
Load your document.
3
Enter the fax number using
Speed-Dial, Search or the
dial pad.
4
Press
Mono Start
.
The MFC starts scanning
the first page.
5
Press
2
to begin dialling.
Press Stop/Exit
to cancel.
Sending more than one page
1
If it is not illuminated in
green, press (
Fax
).
2
Load your document.
3
Enter the fax number using
Speed-Dial, Search or the
dial pad.
4
Press
Mono Start
or
Colour Start
.
The MFC starts scanning
the first page.
5
Press
1
.
6
Place the next page on the
scanner glass.
Press
Menu/Set
.
The MFC starts scanning.
(Repeat step 5 and 6 for
each additional page.)
7
Press
2
to begin dialling.
Press
Stop/Exit
to cancel.
Storing numbers
Storing Speed-Dial numbers
1
Press
Menu/Set
,
2
,
3
,
1
.
2
Using the dial pad, enter a
two-digit Speed-Dial
location number, and then
press
Menu/Set
.
3
Enter a number (up to 20
digits), and then press
Menu/Set
.
4
Enter a name up to 15
characters (or leave it
blank), and then press
Menu/Set
.
5
Press
Stop/Exit
.
Next Page?
1.Yes 2.No(Dial)
Next Page?
1.Yes 2.No(Dial)