User Manual
Table Of Contents
- USER’S GUIDE MFC-210C/MFC-410CN
- APPROVAL INFORMATION
- Compilation and Publication Notice
- Safety precautions
- Choosing a location
- Quick Reference Guide
- Table of Contents
- 1 Introduction
- 2 Getting started
- 3 Setup Send
- How to enter Fax mode
- How to dial
- How to Fax (B&W and Colour)
- Basic sending operations
- Advanced sending operations
- Broadcasting (Not available for colour faxes)
- Overseas Mode
- Delayed Fax (Not available for colour faxes) (MFC-410CN only)
- Delayed Batch Transmission (Not available for colour faxes) (MFC-410CN only)
- Setup for Polled Transmit (Standard) (Not available for colour faxes) (MFC-410CN only)
- Setup for Polled Transmit with Secure Code (Not available for colour faxes) (MFC-410CN only)
- TX Lock (Key Lock for some countries)
- Faxing letter size documents from the scanner glass
- 4 Setup Receive
- Basic receiving operations
- 5 Quick-Dial numbers and dialling options
- 6 Remote Fax Options (MFC-410CN only) (Not available for colour faxes)
- 7 Printing reports
- 8 Making copies
- 9 Walk-Up PhotoCapture Center™
- 10 Important information
- 11 Troubleshooting and routine maintenance
- Appendix A
- Telephone Service for Australia
- Telephone Service for New Zealand
- Telephone Service for Some Countries
- Advanced receiving operations
- Connecting an external device to your MFC
- Appendix B
- Glossary
- Specifications
- Index
- Remote Retrieval Access card (MFC-410CN only)
- brother ARL/ASA/NZ
QUICK-DIAL NUMBERS AND DIALLING OPTIONS 5 - 1
5
Storing numbers for easy dialling
You can set up your MFC to do two types of easy dialling: Speed-Dial
and Groups for Broadcasting faxes. When you dial a quick-dial
number, the LCD shows the name, if you stored it, or the number.
Storing Speed-Dial numbers
You can store Speed-Dial numbers, so that when you dial you will
only have to press a few keys (
Search/Speed Dial
,
#
, the two-digit
number, and
Mono Start
or
Colour Start
). The MFC-210C can
store 20 Speed-Dial numbers and the MFC-410CN can store 80
numbers.
1
Press
Menu/Set
,
2
,
3
,
1
.
2
Use the dial pad to enter a two-digit Speed-Dial location number
(01-20 for MFC-210C, 01-80 for MFC-410CN).
(For example, press
05
.)
Press
Menu/Set
.
3
Enter the phone or fax number (up to 20 digits).
Press
Menu/Set
.
4
Use the dial pad to enter the name (up to 15 characters).
Press
Menu/Set
.
(You can use the
chart on page B-11 to help you enter letters.)
—OR—
Press
Menu/Set
to store the number without a name.
5
Go to Step 2 to store another Speed-Dial number.
—OR—
Press
Stop/Exit
.
Quick-Dial numbers and
dialling options
If you lose electrical power, the quick-dial numbers that are in
the memory will not be lost.