User Manual

4 - 3 SETUP RECEIVE
Setting the F/T Ring Time (Fax/Tel mode only)
If you set the Receive Mode to Fax/Tel, you’ll need to decide how long
the MFC will signal you with its special pseudo/double-ring when you
have a voice call. (If it’s a fax call, the MFC prints the fax.)
This pseudo/double-ring happens after the initial ringing from the
phone company. Only the MFC rings and no other phones on the
same line will ring with the special pseudo/double-ring. However, you
can still answer the call on any telephone on the same line as the MFC.
(See
For Fax/Tel mode only
on page A-14.)
1
If it is not illuminated in green, press (
Fax
).
2
Press
Menu/Set
,
2
,
1
,
2
.
3
Press
▲
or
▼
to select how long the MFC will ring to alert you that
you have a voice call (20, 30, 40 or 70 seconds, 20, 30, 40 or 55
seconds for New Zealand).
Press
Menu/Set
.
4
Press
Stop/Exit
.
Even if the caller hangs up during the pseudo/double-ringing,
the MFC will continue to ring for the set time.