User Manual
Table Of Contents
- USER’S GUIDE MFC-210C/MFC-410CN
- APPROVAL INFORMATION
- Compilation and Publication Notice
- Safety precautions
- Choosing a location
- Quick Reference Guide
- Table of Contents
- 1 Introduction
- 2 Getting started
- 3 Setup Send
- How to enter Fax mode
- How to dial
- How to Fax (B&W and Colour)
- Basic sending operations
- Advanced sending operations
- Broadcasting (Not available for colour faxes)
- Overseas Mode
- Delayed Fax (Not available for colour faxes) (MFC-410CN only)
- Delayed Batch Transmission (Not available for colour faxes) (MFC-410CN only)
- Setup for Polled Transmit (Standard) (Not available for colour faxes) (MFC-410CN only)
- Setup for Polled Transmit with Secure Code (Not available for colour faxes) (MFC-410CN only)
- TX Lock (Key Lock for some countries)
- Faxing letter size documents from the scanner glass
- 4 Setup Receive
- Basic receiving operations
- 5 Quick-Dial numbers and dialling options
- 6 Remote Fax Options (MFC-410CN only) (Not available for colour faxes)
- 7 Printing reports
- 8 Making copies
- 9 Walk-Up PhotoCapture Center™
- 10 Important information
- 11 Troubleshooting and routine maintenance
- Appendix A
- Telephone Service for Australia
- Telephone Service for New Zealand
- Telephone Service for Some Countries
- Advanced receiving operations
- Connecting an external device to your MFC
- Appendix B
- Glossary
- Specifications
- Index
- Remote Retrieval Access card (MFC-410CN only)
- brother ARL/ASA/NZ
3 - 16 SETUP SEND
Setting up the password
1
Press
Menu/Set
,
2
,
0
,
1
.
2
Enter a 4-digit number for the password.
Press
Menu/Set
.
3
If the LCD shows
Verify:
, re-enter the password.
Press
Menu/Set
.
Changing the TX Lock password
1
Press
Menu/Set
,
2
,
0
,
1
.
2
Press
▲
or
▼
to select
Set Password
.
Press
Menu/Set
.
3
Enter a 4-digit number for the current password.
Press
Menu/Set
.
4
Enter a 4-digit number for a new password.
Press
Menu/Set
.
5
If the LCD shows
Verify:
, re-enter the password.
Press
Menu/Set
.
Turning TX Lock on
1
Press
Menu/Set
,
2
,
0
,
1
.
2
Press
▲
or
▼
to select
Set TX Lock
.
Press
Menu/Set
.
3
Enter the registered 4-digit password.
Press
Menu/Set
.
The MFC goes offline and the LCD shows
TX Lock Mode
.
If you forget the TX Lock password, please contact your Brother
dealer or Brother for assistance.