User Manual
Table Of Contents
- USER’S GUIDE MFC-210C/MFC-410CN
- APPROVAL INFORMATION
- Compilation and Publication Notice
- Safety precautions
- Choosing a location
- Quick Reference Guide
- Table of Contents
- 1 Introduction
- 2 Getting started
- 3 Setup Send
- How to enter Fax mode
- How to dial
- How to Fax (B&W and Colour)
- Basic sending operations
- Advanced sending operations
- Broadcasting (Not available for colour faxes)
- Overseas Mode
- Delayed Fax (Not available for colour faxes) (MFC-410CN only)
- Delayed Batch Transmission (Not available for colour faxes) (MFC-410CN only)
- Setup for Polled Transmit (Standard) (Not available for colour faxes) (MFC-410CN only)
- Setup for Polled Transmit with Secure Code (Not available for colour faxes) (MFC-410CN only)
- TX Lock (Key Lock for some countries)
- Faxing letter size documents from the scanner glass
- 4 Setup Receive
- Basic receiving operations
- 5 Quick-Dial numbers and dialling options
- 6 Remote Fax Options (MFC-410CN only) (Not available for colour faxes)
- 7 Printing reports
- 8 Making copies
- 9 Walk-Up PhotoCapture Center™
- 10 Important information
- 11 Troubleshooting and routine maintenance
- Appendix A
- Telephone Service for Australia
- Telephone Service for New Zealand
- Telephone Service for Some Countries
- Advanced receiving operations
- Connecting an external device to your MFC
- Appendix B
- Glossary
- Specifications
- Index
- Remote Retrieval Access card (MFC-410CN only)
- brother ARL/ASA/NZ
A - 11 APPENDIX A
Telephone Service for Some Countries
Distinctive Ringing (For Singapore and Hong
Kong)
This MFC feature lets you use the Distinctive Ringing subscriber
service offered by some telephone companies, which allows you to
have several telephone numbers on one phone line. Each phone
number has its own Distinctive Ringing pattern, so you will know
which phone number is ringing. This is one way you can have a
separate phone number for your MFC.
Your MFC has a Distinctive Ringing function, allowing you to
dedicate one phone number just for receiving faxes. You will need to
set Distinctive Ringing to
On
.
Setting the Distinctive Ringing
1
Press
Menu/Set
,
2
,
0
,
3
.
2
Press
▲
or
▼
to select
On
(or
Off
).
3
Press
Menu/Set
.
4
Press
Stop/Exit
.
You can switch it off temporarily, then turn it back on. When you
get a new fax number, make sure you reset this function.
■
The MFC will answer only calls to the Distinctive Ringing
number.
After you have set the Distinctive Ring feature to
On
, the receive
mode is set to
Manual
automatically. Unless you have a TAD or
Voice Mail set up on the Distinctive Ring number,
Manual
mode
means you must answer all the call yourself. You can not
change the receive mode to the other mode while the Distinctive
Ring is set to on.
Miscellaneous
3.Distinctive










