User`s guide

ManualsBrandsBrother ManualsPrint & ScanMFC-210C - Color Inkjet - All-in-One

USER’S GUIDE

MFC-210C

MFC-420CN

Version B

Summary of content (200 pages)

PAGE 1
USER’S GUIDE MFC-210C MFC-420CN ® Version B
PAGE 2
If you need to call Customer Service Please complete the following information for future reference: Model Number: MFC-210C and MFC-420CN (Circle your model number) Serial Number:* Date of Purchase: Place of Purchase: * The serial number is on the back of the unit. Retain this User’s Guide with your sales receipt as a permanent record of your purchase, in the event of theft, fire or warranty service. Register your product on-line at http://www.brother.
PAGE 3
Brother numbers IMPORTANT For technical help, you must call the country where you bought the MFC. Calls must be made from within that country. Register your product By registering your product with Brother International Corporation, you will be recorded as the original owner of the product.
PAGE 4
Brother fax back system (USA only) Brother has installed an easy-to-use fax back system, so you can get instant answers to common technical questions and product information for all Brother products. This system is available 24 hours a day, 7 days a week. You can use the system to receive faxed instructions and an Index of fax back subjects.
PAGE 5
Notice - Disclaimer of Warranties (USA and Canada) BROTHER’S LICENSOR(S), AND THEIR DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS (COLLECTIVELY BROTHER’S LICENSOR) MAKE NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, REGARDING THE SOFTWARE.
PAGE 6
Brother® One Year Limited Warranty and Replacement Service (USA only) Who is covered: • This limited warranty ("warranty") is given only to the original end-use/retail purchaser (referred to in this warranty as "Original Purchaser") of the accompanying product, consumables and accessories (collectively referred to in this warranty as "this Product").
PAGE 7
Brother® One Year Limited Warranty and Replacement Service (USA only) damage to the product; or (iv) the warranty by Brother in its sole discretion. Brother period on your original Product has expired or reserves the right to supply a refurbished or has not been sufficiently validated with a copy remanufactured replacement Machine of the proof of purchase (bill of sale).
PAGE 8
BROTHER MULTIFUNCTION CENTER/FACSIMILE MACHINE LIMITED WARRANTY (Canada only) Pursuant to this limited warranty of 1 year from the date of purchase for labour and parts, Brother International Corporation (Canada) Ltd. (“Brother”), or its Authorized Service Centers, will repair this MFC/Facsimile machine free of charge if defective in material or workmanship.
PAGE 9
Safety precautions To use the MFC safely Please refer to these instructions for later reference and before attempting any maintenance. WARNING There are high voltage electrodes inside the MFC. Before you clean the MFC, make sure you have unplugged the telephone line cord first and then the power cord from the AC power outlet. Do not handle the plug with wet hands. Doing this might cause an electrical shock.
PAGE 10
WARNING ■ Use caution when installing or modifying telephone lines. Never touch telephone wires or terminals that are not insulated unless the telephone line has been disconnected at the walljack. Never install telephone wiring during a lightning storm. Never install a telephone wall jack in a wet location. ■ This product must be installed near an AC power outlet that is easily accessible.
PAGE 11
Choosing a location Place your MFC on a flat, stable surface that is free of vibration and shocks, such as a desk. Put the MFC near a telephone wall jack and a standard, grounded AC power outlet. Choose a location where the temperature remains between 50°F and 95°F (10°-35°C). Caution ■ Avoid placing your MFC in a high-traffic area. ■ Avoid placing your MFC on the carpet. ■ Do not place near heaters, air conditioners, water, chemicals, or refrigerators.
PAGE 12
Quick Reference Guide Sending Black & White Faxes 5 6 Automatic Transmission Sending a fax 1 If it is not illuminated in green, press (Fax). 2 Load your document. 3 Enter the fax number using Speed-Dial, Search or the dial pad. 4 Press Black Start. The MFC starts scanning the first page. 7 8 Next Page? 1.Yes 2.No(Dial) 5 6 Press 2 to begin dialing. Press Stop/Exit to cancel. Sending more than one page 1 If it is not illuminated in green, press (Fax). 2 Load your document.
PAGE 13
Dialing operations Speed-Dialing 1 If it is not illuminated in green, press (Fax). 2 Load your document. 3 Press Search/Speed Dial, press #, and then press the two-digit Speed-Dial number. 4 Press Black Start or Color Start. Using Search 2 3 5 xi ▲ 4 If it is not illuminated in green, press (Fax). Load your document. Press Search/Speed Dial, and then enter the first letter of the name you’re looking for. Press or to search the memory. Press Black Start or Color Start.
PAGE 14
Table of Contents 1 2 Introduction .......................................................................... 1-1 Using this Guide ............................................................... 1-1 Finding information ..................................................... 1-1 Symbols used in this Guide ........................................ 1-1 Control panel overview ..................................................... 1-2 Turning the MFC on and off........................................
PAGE 15
Setting the Speaker Volume ....................................... 2-5 Turning on Automatic Daylight Savings Time............. 2-6 Setting the LCD Contrast............................................ 2-6 3 4 xiii Setup Send ........................................................................... 3-1 How to enter Fax mode .................................................... 3-1 How to dial ........................................................................ 3-1 Manual dialing......................
PAGE 16
Easy Receive ............................................................. 4-4 Printing a reduced incoming fax (Auto Reduction) ..... 4-5 Printing a fax from the memory (MFC-420CN only) ... 4-5 Polling (MFC-420CN only).......................................... 4-6 Setting up Polling Receive ..................................... 4-6 Setting up Sequential Polling Receive ................... 4-6 5 6 7 8 Quick-Dial numbers and dialing options ...........................
PAGE 17
Using the Copy Options key (Temporary settings) ........... 8-3 Changing the temporary copy settings ....................... 8-4 Increasing copy speed or quality ............................ 8-5 Enlarging or reducing the image copied ................. 8-6 Setting paper type .................................................. 8-7 Setting paper size................................................... 8-8 Adjusting brightness ...............................................
PAGE 18
Federal Communications Commission (FCC) Declaration of Conformity (USA only) .................. 10-3 Important .............................................................. 10-4 Industry Canada Compliance Statement (Canada only) ....................................................... 10-4 For your safety.......................................................... 10-4 LAN connection (MFC-420CN only) ......................... 10-4 Important safety instructions.....................................
PAGE 19
Caller ID........................................................................... A-5 Viewing Caller ID List................................................. A-6 Printing Caller ID List ................................................. A-6 Advanced receiving operations........................................ A-7 Operation from extension telephones........................ A-7 Fax/Tel mode when power key is On ........................ A-7 Fax/Tel mode when power key is Off ........................
PAGE 20
Print media .......................................................................S-2 Copy .................................................................................S-3 PhotoCapture Center........................................................S-4 Fax....................................................................................S-5 Scanner ............................................................................S-6 Printer .....................................................................
PAGE 21
1 Introduction Using this Guide Thank you for buying a Brother Multi-Function Center (MFC). Your MFC is simple to use, with LCD screen instructions to guide you through programming it. You can make the most of your MFC by reading through this Guide. Finding information All the chapter headings and subheadings are listed in the Table of Contents. You will be able to find information about a specific feature or operation by checking the Index at the back of this Guide.
PAGE 22
Control panel overview 1 Redial/Pause 5 Mode keys: Redials the last number you called. It also inserts a pause in quick dial numbers. PhotoCapture Lets you access the PhotoCapture Center™ mode. 2 Hook Copy Press before dialing if you want to make sure a fax machine will answer, and then press Black Start or Color Start. Lets you access Copy mode. Fax Lets you access Fax mode. 3 Ink Lets you clean the print head, check the print quality, and check the available ink volume.
PAGE 23
Color Start Lets you start sending faxes or making copies in full color. Also lets you start a scanning operation (in color or mono, depending on the scanning setting on your PC). < Stop/Exit Stops an operation or exits from the menu. A Navigation keys: ▲ Search/Speed Dial Lets you look up numbers that are stored in the dialing memory. It also lets you dial stored numbers by pressing # and a two-digit number. ▲ 9 Press to scroll backward to a menu selection.
PAGE 24
Turning the MFC on and off When the machine is idle, you can turn it on and off by pressing the On/Off key. In Off mode, no MFC operations will be available. Even if you turned the MFC off, it will periodically clean the print head to preserve print quality. Turning the MFC off Press and hold down the On/Off key until the LCD shows: The LCD light will go off. Turning the MFC on Press and hold down the On/Off key until the LCD shows: The LCD will show the date and time (Fax mode).
PAGE 25
(For MFC-420CN) On/Off Setting Receive Mode Available Operations Fax Receive:Off (default) — No machine operations will be available. Fax Receive:On Fax Only External TAD Fax Receive, Easy Receive, Delayed Fax, Remote Fax Options, Remote Retrieval. ■ You cannot receive a fax with Black Start or Color Start. ■ Delayed Fax and Remote Fax Options should be set before you switch off the machine. Manual Fax/Tel* Delayed Fax, Easy Receive ■ You cannot receive a fax with Black Start or Color Start.
PAGE 26
Load documents You can send a fax, make copies, and scan from the ADF (automatic document feeder) and from the scanner glass. Using the automatic document feeder (ADF) (Not available for MFC-210C) The ADF can hold up to 10 pages and feeds each sheet individually. Use standard (20 lb) paper and always fan the pages before putting them in the ADF. DO NOT use paper that is curled, wrinkled, folded, ripped, stapled, paper clipped, pasted or taped. DO NOT use cardboard, newspaper or fabric.
PAGE 27
1 2 3 Fan the pages well. Make sure you put the documents face down, top edge first in the ADF until you feel them touch the feed roller. Adjust the paper guides to fit the width of your documents. Unfold the ADF Document Output Support Flap. ADF Document Output Support Flap DO NOT pull on the document while it is feeding. To use the ADF, the scanner glass must be empty.
PAGE 28
Using the scanner glass You can use the scanner glass to fax pages of a book or one page at a time. Documents can be up to letter size (8.5 inches to 11 inches). To use the scanner glass, the ADF must be empty. 1 Lift the document cover. Place documents Face Down on the Scanner Glass 2 3 Using the document guidelines on the left, center the document face down on the scanner glass. Close the document cover. If the document is a book or is thick, do not slam the cover or press on it.
PAGE 29
About paper The print quality can be affected by the kind of paper you use in the MFC. To get the best print quality for the settings you’ve chosen, always set the Paper Type to match the type of paper you load. You can use plain paper, inkjet paper (coated paper), glossy paper, transparencies and envelopes. We recommend testing various paper types before purchasing large quantities. For best results, use the recommended paper.
PAGE 30
Handling and using special paper ■ Store paper in its original packaging, and keep it sealed. Keep the paper flat and away from moisture, direct sunlight and heat. ■ The coated side of glossy paper is shiny. Avoid touching the shiny (coated) side. Load glossy paper with the shiny side facing down. ■ Avoid touching either side of transparencies, because they absorb water and perspiration easily, and this may cause decreased output quality.
PAGE 31
INTRODUCTION 1 - 11 Transparencies Envelopes Cards 5.8" x 8.3" (148 x 210 mm) 4.1" x 5.8" (105 x 148 mm) A5 A6 8 1/2" x 11" (216 x 279 mm) JE4 Envelope 8.3" x 11.7" (210 x 297 mm) 3 7/8" x 7 1/2" (98 x 191 mm) 4.1" x 9.3" (105 x 235 mm) Monarch Letter 4 1/8" x 9 1/2" (105 x 241 mm) A4 4.3" x 8.7" (110 x 220 mm) Post Card 2 (Double) COM-10 5.8" x 7.9" (148 x 200 mm) Post Card 1 DL Envelope 3.9" x 5.8" (100 x 148 mm) Index Card 6.
PAGE 32
Paper weight, thickness and capacity Paper Type Weight Thickness No. of sheets Plain Paper 17 to 32 lb (64 to 120 g/m2) 0.003" to 0.006" (0.08 to 0.15 mm) 100* Inkjet Paper 17 to 53 lb (64 to 200 g/m2) 0.003" to 0.01" (0.08 to 0.25 mm) 20 Glossy Paper Up to 58 lb (Up to 220 g/m2) Up to 0.01" (Up to 0.25 mm) 20 Photo Card Up to 64 lb (Up to 240 g/m2) Up to 0.01" (Up to 0.28 mm) 20 Index Card Up to 32 lb (Up to 120 g/m2) Up to 0.006" (Up to 0.
PAGE 33
Printable area The printable area depends on the settings in the application you are using. The figures below show the unprintable areas on cut sheet paper and envelopes. Cut Sheet Paper 3 Envelopes 3 4 1 4 1 2 2 ■ unprintable area , 1Top 2Bottom 3Left 4Right Cut Sheet 0.12 in. (0 in.)*1 0.12 in. (0 in.)*1 0.12 in. (0 in.)*1 0.12 in. (0 in.)*1 Envelopes 0.47 in. 0.94 in. 0.12 in. 0.12 in. *1 When you set the Borderless feature to On.
PAGE 34
How to load paper, envelopes and post cards To load paper or other media 1 Pull the paper tray completely out of the MFC and remove the output paper tray. 2 Press and slide the paper side guide to fit the paper width. Paper Side Guide 3 Pull out the paper support and unfold the paper support flap. Paper Support Paper Support Flap Use the paper support flap for Letter, Legal and A4.
PAGE 35
4 Fan the stack of paper well to avoid paper jams and mis-feeds. 5 Gently insert the paper into the paper tray print side face down and the leading edge (top of the paper) in first. Check that the paper is flat in the tray and below the maximum paper mark. Maximum Paper Mark ■ Make sure the paper side guides touch the sides of the paper. ■ Be careful that you do not push the paper in too far; it may lift at the back of the tray and cause feed problems.
PAGE 36
To load envelopes ■ Use envelopes that weigh from 75-95 g/m2. ■ Some envelopes require margin settings in the application. Make sure you do a test print first. To prevent possible damage to the feeding mechanism, do not use the types of envelopes shown below.
PAGE 37
2 Insert the envelopes into the paper tray with the address side down and the leading edge (top of the envelopes) in first. Slide the paper side guide to fit the width of the envelopes. If you have problems when printing on envelopes, try the following suggestions: 1 Open the envelope flap. 2 Make sure the open flap is either to the side of the envelope or to the back edge of the envelope when printing. 3 Adjust the size and margin in your application.
PAGE 38
About fax machines Custom features Do you have Voice Mail on the phone line? If you have Voice Mail on the phone line where you will install your new MFC, there is a strong possibility that Voice Mail and the MFC may conflict with each other while receiving incoming calls. Why should there be problems? Since both the MFC and Voice Mail will pick up the call, after the number of rings you have set, each of them has the ability to keep the other from receiving calls.
PAGE 39
Fax tones and handshake When someone is sending a fax, the MFC sends fax calling tones (CNG tones). These are quiet, intermittent beeps every 4-seconds. You’ll hear them after you dial and press Black Start or Color Start and they will continue for about 60 seconds afterdialing. During that time, the sending machine must begin the “handshake”, or connection, with the receiving machine. Each time you use automatic procedures to send a fax, you are sending CNG tones over the phone line.
PAGE 40
ECM (Error Correction Mode) The Error Correction Mode (ECM) is a way for the MFC to check a fax transmission while it is in progress. If the MFC detects errors during fax transmission, it resends the pages of the fax that had an error. ECM transmissions are only possible between fax machines that both have this feature. If they do, you may send and receive fax messages that are continuously being checked by the MFC. Your MFC must have enough memory for this feature to work.
PAGE 41
2 Getting started Initial Setup Setting the Date and Time When the MFC is not in use it will display the date and time. If you set up the Station ID the date and time displayed by your MFC will be printed on every fax you send. If there is a power failure, you may have to reset the date and time. No other settings will be affected. 1 2 3 4 5 6 Press Menu/Set, 0, 2. Initial Setup 2.Date/Time Enter the last two digits of the year. Press Menu/Set. Enter two digits for the month. Press Menu/Set.
PAGE 42
Setting the Station ID You should store your name or company name and fax number so they print on all fax pages you send. 1 2 Press Menu/Set, 0, 3. Enter your fax number (up to 20 digits). Press Menu/Set. Initial Setup 3.Station ID You cannot enter a hyphen in the fax number. To enter a space press once between numbers. 3 4 Use the dial pad to enter your name (up to 20 characters). (See Entering Text on page B-11). Press Menu/Set. Press Stop/Exit.
PAGE 43
General Setup Setting the Mode Timer The MFC has four temporary mode keys on the control panel: PhotoCapture, Copy, Fax and Scan. You can change the number of seconds or minutes the MFC takes after the last Copy, Scan or PhotoCapture operation before it returns to Fax mode. If you select Off, the MFC stays in the mode you used last. 1 2 3 Press Menu/Set, 1, 1. Press ▲ or ▼ to select 0 Sec, 30 Secs, 1 Min, 2 Mins, 5 Mins or Off. Press Menu/Set. Press Stop/Exit. General Setup 1.
PAGE 44
Setting the Paper Size You can use five sizes of paper for printing copies: Letter, Legal, A4, A5, and 4” x 6” and three sizes for printing faxes: Letter, Legal and A4. When you change the type of paper you load in the MFC, you will need to change the setting for Paper Size at the same time so your MFC can fit an incoming fax on the page. 1 2 3 Press Menu/Set, 1, 3. Press ▲ or ▼ to select Letter, Legal, A4, A5 or 4"x6". Press Menu/Set. Press Stop/Exit. General Setup 3.
PAGE 45
Setting the Beeper Volume You can change the beeper volume. The default (factory) setting is Low. When the beeper is on, the MFC will beep when you press a key, make a mistake or you send or receive a fax. 1 2 3 Press Menu/Set, 1, 4, 2. Press ▲ or ▼ to select your option. (Low, Med, High or Off) Press Menu/Set. Press Stop/Exit. Volume 2.Beeper Setting the Speaker Volume You can adjust the MFC’s one-way speaker volume. 1 2 Press Menu/Set, 1, 4, 3. Volume 3.
PAGE 46
Turning on Automatic Daylight Savings Time You can set the MFC to change automatically for Daylight Savings Time. It will reset itself forward one hour in the Spring and backward one hour in the Fall. Make sure you have set the correct day and time in the Date/Time setting. 1 2 3 Press Menu/Set, 1, 5. Press ▲ or ▼ to select On (or Off). Press Menu/Set. Press Stop/Exit. General Setup 5.Auto Daylight Setting the LCD Contrast You can adjust the LCD contrast for a sharper and more vivid display.
PAGE 47
3 Setup Send How to enter Fax mode Before sending faxes, make sure green. If not, press setting is Fax. (Fax) is illuminated in (Fax) to enter Fax mode. The default How to dial You can dial in any of the following different ways. Manual dialing Press all of the digits of the phone or fax number.
PAGE 48
Speed-Dialing Press Search/Speed Dial, #, and then the two digit Speed-Dial number. (See Storing Speed-Dial numbers on page 5-1.) two-digit number If the LCD shows Not Registered when you enter the Speed-Dial number, a number has not been stored for it. Search You can search for names you have stored in the Speed-Dial memories. Press Search/Speed Dial and the navigation keys to search. (See Storing Speed-Dial numbers on page 5-1.
PAGE 49
How to Fax (B&W and Color) Color fax transmission Your MFC can send a color fax to machines that support this feature. However, color faxes cannot be stored in the memory. When you send a color fax, the MFC will send it in real time (even if Real Time TX is set to Off). (MFC-420CN) Delayed fax and Polling Transmit features are not available in color. Faxing from the ADF (MFC-420CN only) Put the document face down in the ADF. To cancel, press Stop/Exit.
PAGE 50
Faxing from the scanner glass You can use the scanner glass to fax pages of a book or one page at a time. The documents can be up to letter size. To cancel, press Stop/Exit. 1 2 3 4 5 If it is not illuminated in green, press (Fax). Load your document on the scanner glass. Dial the fax number. Press Black Start or Color Start. The MFC starts scanning the first page. If you press Color Start, the MFC starts sending. To send a single page, press 2 (or Next Page? 1.Yes 2.No(Dial) press Black Start again).
PAGE 51
Automatic transmission This is the easiest way to send a fax. Do not pick up the handset of the external phone or press Hook to listen for a dial tone. 1 2 3 4 5 If it is not illuminated in green, press (Fax). Load your document. Enter the fax number using the dial pad, Speed-Dial or Search. (See How to dial on page 3-1.) Press Black Start or Color Start. For MFC-210C, go to Step 4 on page 3-4.
PAGE 52
Basic sending operations Sending faxes using multiple settings When you send a fax you can choose any combination of these settings: contrast, resolution, overseas mode, delayed fax timer (MFC-420CN only), polling transmission (MFC-420CN only) or real time transmission. 1 2 If it is not illuminated in green, press (Fax). After each setting is accepted, the LCD will ask if you want to enter more settings: Press 1 to select more settings. The Other Settings 1.Yes 2.No LCD will return to the Setup Send menu.
PAGE 53
Fax Resolution You can use the Fax Resolution key to change the setting temporarily (for this fax only). In Fax mode , press Fax Resolution and ▲ or ▼ to select the setting you want, and then press Menu/Set. —OR— You can change the default setting: 1 2 3 4 If it is not illuminated in green, press Load your document. Press Menu/Set, 2, 2, 2. Press ▲ or ▼ to select the resolution you want. Press Menu/Set. (Fax). Setup Send 2.Fax Resolution Standard Suitable for most typed documents.
PAGE 54
Dual Access (Not available for color faxes) You can dial a number, and begin scanning the fax into memory— even when the MFC is sending from memory or receiving faxes. The LCD shows the new job number and available memory. Your MFC normally uses Dual Access. However, to send a color fax, the MFC will send the document in real time (even if Real Time TX is Off). The number of pages you can scan into the memory will vary depending on the data that is printed on them.
PAGE 55
Real Time Transmission When you are sending a fax, the MFC will scan the documents into the memory before sending. Then, as soon as the phone line is free, the MFC will start dialing and sending. If the memory becomes full, the MFC will send the document in real time (even if Real Time TX is set to Off). Sometimes, you may want to send an important document immediately, without waiting for memory transmission. You can set Real Time TX to On for all documents or for the next fax only.
PAGE 56
Checking job status Check which jobs are still waiting in the memory to be sent. (If there are no jobs, the LCD shows No Jobs Waiting.) 1 2 3 For MFC-210C, Fax 6.Remaining Jobs press Menu/Set, 2, 5. For MFC-420CN, press Menu/Set, 2, 6. If you have more than one job waiting, press ▲ or ▼ to scroll through the list. Press Stop/Exit. Canceling a fax in progress If you want to cancel a fax, while the MFC is scanning, dialing or sending it, press Stop/Exit.
PAGE 57
Advanced sending operations Broadcasting (Not available for color faxes) Broadcasting is when the same fax message is automatically sent to more than one fax number. You can include Groups, Speed-Dial numbers and up to 50 manually dialed numbers in the same broadcast. Press Menu/Set between each of the numbers. Use Search/Speed Dial to help you choose the numbers easily. (To set up Group dial numbers, see Setting up Groups for Broadcasting on page 5-3.
PAGE 58
■ If you did not use up any of the numbers for Groups, access codes or credit card numbers, you can ‘broadcast’ faxes to as many as 70 (MFC-210C) or 130 (MFC-420CN) different numbers. ■ The available memory will vary depending on the types of jobs in the memory and the number of locations used for broadcasting. If you broadcast to the maximum numbers available, you will not be able to use Dual Access and Delayed fax (MFC-420CN only).
PAGE 59
Delayed Fax (Not available for color faxes) (MFC-420CN only) During the day you can store up to 50 faxes in the memory to be sent within 24 hours. These faxes will be sent at the time of day you enter in Step 4. 1 2 3 4 If it is not illuminated in green, press (Fax). Load your document. Press Menu/Set, 2, 2, 3. Setup Send 3.Delayed Fax Press Menu/Set to accept the displayed time. —OR— Enter the time you want the fax to be sent (in 24-hour format). Press Menu/Set. (For example, enter 19:45 for 7:45 PM.
PAGE 60
Delayed Batch Transmission (Not available for color faxes) (MFC-420CN only) Before sending the delayed faxes, your MFC will help you economize by sorting all the faxes in the memory by destination and scheduled time. All delayed faxes that are scheduled to be sent at the same time to the same fax number will be sent as one fax to save transmission time. 1 2 3 4 If it is not illuminated in green, press Press Menu/Set, 2, 2, 4. Press ▲ or ▼ to select On (or Off). Press Menu/Set. Press Stop/Exit. (Fax).
PAGE 61
4 Setup Receive Basic receiving operations Choosing the Receive Mode There are four different Receive Modes for your MFC. You can choose the mode that best suits your needs. LCD How it works When to use it Fax Only (automatic receive) The MFC automatically answers every call as a fax. For dedicated fax lines. Fax/Tel (fax and telephone) The MFC controls the line and automatically answers every call. If the call is a fax it will receive the fax.
PAGE 62
To select or change your Receive Mode 1 2 3 4 If it is not illuminated in green, press Press Menu/Set, 0, 1. Press ▲ or ▼ to select Fax Only, Fax/Tel, External TAD or Manual. Press Menu/Set. Press Stop/Exit. (Fax). Initial Setup 1.Receive Mode Current Receive Mode Fax : Fax Only F/T : Fax/Tel TAD : External TAD Mnl : Manual Setting the Ring Delay The Ring Delay sets the number of times the MFC rings before it answers in Fax Only or Fax/Tel mode.
PAGE 63
Setting the F/T Ring Time (Fax/Tel mode only) If you set the Receive Mode to Fax/Tel, you’ll need to decide how long the MFC will signal you with its special pseudo/double-ring when you have a voice call. (If it’s a fax call, the MFC prints the fax.) This pseudo/double-ring happens after the initial ringing from the phone company. Only the MFC rings and no other phones on the same line will ring with the special pseudo/double-ring.
PAGE 64
Easy Receive When you use this feature, you don’t have to press Black Start, Color Start, or the Fax Receive Code 51 when you answer a fax call. Selecting On allows the MFC to receive fax calls automatically, even if you lift the handset of an extension or external phone. When you see Receiving on the LCD or when you hear ‘chirps’ through the handset of an extension phone connected to another telephone wall jack, just replace the handset and your MFC will do the rest.
PAGE 65
Printing a reduced incoming fax (Auto Reduction) If you choose On, the MFC automatically reduces an incoming fax to fit on one page of Letter, Legal or A4 size paper. The MFC calculates the reduction ratio by using the page size of the document and your Paper Size setting (Menu/Set, 1, 3). 1 2 3 4 If it is not illuminated in green, press Press Menu/Set, 2, 1, 5. Use ▲ or ▼ to select On (or Off). Press Menu/Set. Press Stop/Exit. (Fax). Setup Receive 5.
PAGE 66
Polling (MFC-420CN only) Polling is the process of retrieving faxes from another fax machine. You can use your MFC to ‘poll’ other machines, or you can have someone poll your MFC. Everyone who is involved in Polling needs to set up their fax machines for Polling. When someone polls your MFC to receive a fax, they pay for the call. If you poll someone’s fax machine to receive a fax, you pay for the call. Some fax machines do not respond to the Polling feature.
PAGE 67
5 Quick-Dial numbers and dialing options Storing numbers for easy dialing You can set up your MFC to do two types of easy dialing: Speed-Dial and Groups for Broadcasting faxes. When you dial a quick-dial number, the LCD shows the name, if you stored it, or the number. If you lose electrical power, the quick-dial numbers that are in the memory will not be lost.
PAGE 68
Changing Speed-Dial numbers ▲ 5 - 2 QUICK-DIAL NUMBERS AND DIALING OPTIONS ▲ If you try to store a Speed-Dial number where a number has already been stored, the LCD will show the name that has been stored there (or number) and will ask you to do one of the following: 1 Press 1 to change the stored number. —OR— Press 2 to exit without making a change.
PAGE 69
Setting up Groups for Broadcasting Groups allow you to send the same fax message to many fax numbers by pressing only a few keys (Search/Speed Dial, #, the two-digit number, and Black Start). First, you’ll need to store each fax number as a Speed-Dial number. Then, you can combine them into a Group. Each Group uses up a Speed-Dial number. You can have up to six Groups, or you can assign up to 19 numbers (MFC-210C) or up to 79 numbers (MFC-420CN) to one large Group.
PAGE 70
5 6 7 Press Menu/Set to accept the Speed-Dial numbers for this Group. Use the dial pad and the chart on page B-11 to enter a name for the Group. Press Menu/Set. (For example, type NEW CLIENTS). Press Stop/Exit. You can print a list of all the Speed-Dial numbers. Group numbers will be marked in the GROUP column. (See Printing reports on page 7-3.
PAGE 71
Dialing options There are two ways to dial. (See How to dial on page 3-1.) Access codes and credit card numbers Sometimes you may want to choose from several long distance carriers when you make a call. Rates may vary depending on the time and destination. To take advantage of low rates, you can store the access codes or long-distance carriers and credit card numbers as Speed-Dial numbers.
PAGE 72
Tone or Pulse If you have a Pulse dialing service, but need to send Tone signals (for example, for telephone banking), follow the instructions below. If you have Touch Tone service, you will not need this feature to send tone signals. 1 2 Lift the handset of the external phone. Press # on the MFC’s control panel. Any digits dialed after this will send tone signals. When you hang up, the MFC will return to the Pulse dialing service.
PAGE 73
6 Remote Fax Options (MFC-420CN only) (Not available for color faxes) You can only use one remote fax option at a time: Fax Forwarding—OR—Paging—OR—Fax Storage—OR— PC FAX Rx—OR—Off. You can change your selection at any time (Menu/Set, 2, 5, 1). (See Turning off Remote Fax Options on page 6-4.) Setting up Fax Forwarding When you select Fax Forward, your MFC stores the received fax in the memory. The MFC will then dial the fax number you’ve programmed and forward the fax message.
PAGE 74
Programming your pager number When Paging is selected, your MFC dials the pager number you’ve programmed, and then dials your Personal Identification Number (PIN). This activates your pager so you will know that you have a fax message in the memory. 1 2 3 4 5 Press Menu/Set, 2, 5, 1. Remote Fax Opt 1.Fwd/Page/Store Press ▲ or ▼ to select Paging. Enter your pager phone number followed by # # (up to 20 digits). Press Menu/Set. Do not include the area code if it is the same as that of your MFC.
PAGE 75
Setting Fax Storage If you select Fax Storage, your MFC stores the received fax in the memory. You will be able to retrieve fax messages from another location using the Remote Retrieval commands. 1 2 3 Press Menu/Set, 2, 5, 1. Remote Fax Opt 1.Fwd/Page/Store Press ▲ or ▼ to select Fax Storage. Press Menu/Set. Press Stop/Exit. If you have set Fax Storage, a backup copy will automatically be printed at the MFC.
PAGE 76
Turning off Remote Fax Options If you set the Remote Fax Options to Off and there are faxes in your MFC’s memory, the LCD will give you two options. ■ If you press 1, all unprinted faxes will be printed and erased before the setting turns off. If a backup copy has already been printed it will not be printed again. ■ If you press 2, the memory will not be erased and the setting will be unchanged. (See Printing a fax from the memory (MFC-420CN only) on page 4-5.
PAGE 77
Remote Retrieval You can call your MFC from any touch tone telephone or fax machine, then use the Remote Access Code and remote commands to retrieve fax messages. Be sure to cut out the Remote Retrieval Access Card on the last page and keep it with you at all times. Using your Remote Access Code 1 2 3 4 5 6 Dial your fax number from a telephone or another fax machine using touch tone. When your MFC answers, immediately enter your Remote Access Code (3 digits followed by ).
PAGE 78
Remote commands Follow the commands below to access features when you are away from the MFC. When you call the MFC and enter your Remote Access Code (3 digits followed by ), the system will give two short beeps and you must enter a remote command. Remote commands 95 Change the Fax Forwarding, Paging or Fax Storage settings 1 OFF You can select Off after you have retrieved or erased all your messages. 2 Fax Forwarding If you hear one long beep, the change has been accepted.
PAGE 79
Retrieving fax messages You can call your MFC from any touch tone phone and have your fax messages sent to a fax machine. 1 2 3 4 Dial your fax number. When your MFC answers, immediately enter your Remote Access Code (3 digits followed by ). If you hear one long beep, you have messages. As soon as you hear two short beeps, use the dial pad to press 962.
PAGE 80
7 Printing reports Fax settings and activity You need to set up the Transmission Verification Report and Journal Period in the menu table. Press Menu/Set, 2, 4, 1. —OR— Press Menu/Set, 2, 4, 2. Report Setting 1.Transmission Report Setting 2.Journal Period Customizing the Transmission Verification Report You can use the Transmission Report as proof that you sent a fax. This report lists the time and date of transmission and whether the transmission was successful (OK).
PAGE 81
Setting the Journal Period You can set the MFC to print a journal at specific intervals (every 50 faxes, 6, 12 or 24 hours, 2 or 7 days). If you set the interval to Off, you can print the report by following the steps on the next page. The default setting is Every 50 Faxes. 1 2 3 4 Press Menu/Set, 2, 4, 2. Report Setting 2.Journal Period Press ▲ or ▼ to choose an interval. Press Menu/Set. (If you choose 7 days, the LCD will ask you to choose a day on which to begin the 7-day countdown.
PAGE 82
Printing reports Following reports are available: 1.Help List Prints the Help List so you can see at-a-glance how to quickly program your MFC. 2.Quick-Dial Lists names and numbers stored in the Speed-Dial memory, in numerical order. 3.Fax Journal Lists information about the last incoming and outgoing faxes. (TX means Transmit.) (RX means Receive.) 4.Transmission Prints a Transmission Verification Report for your last transmission. 5.User Settings Lists your settings. (MFC-420CN only) 6.
PAGE 83
8 Making copies Using the MFC as a copier You can use your MFC as a copier, making up to 99 copies at a time. Enter Copy mode (Copy) is illuminated Before making copies, make sure that in green. If it is not, press (Copy) to enter Copy mode. The default setting is Fax. You can change the number of seconds or minutes that the MFC stays in Copy mode. (See Setting the Mode Timer on page 2-3.
PAGE 84
Making a single copy 1 2 3 Press (Copy) to illuminate it in green. Load your document. (See Load documents on page 1-6.) Press Black Start or Color Start. To stop copying, press Stop/Exit. Making multiple copies 1 2 3 4 Press (Copy) to illuminate it in green. Load your document. Use the dial pad to enter the number of copies you want (up to 99). Press Black Start or Color Start. (MFC-420CN only) To sort the copies, press the Copy Options key.
PAGE 85
Using the Copy Options key (Temporary settings) When you want to quickly change the copy settings temporarily for the next copy, use the Copy Options key. You can use different combinations. Copy Options key These settings are temporary, and the MFC returns to its default settings 60 seconds after it finishes copying. However if you have set the Mode Timer to 0 or 30 seconds, the MFC returns to the default settings after the number of seconds that has been set for mode timer.
PAGE 86
Changing the temporary copy settings Use the Copy Options key to quickly set the following copy settings temporarily for the next copy.
PAGE 87
Increasing copy speed or quality You can select the copy quality. The default setting is Normal. Normal Recommended mode for ordinary printouts. Good copy quality with adequate copy speed. Fast Fast copy speed and lowest ink consumption. Use FAST to save time (document to be proof-read, large documents or many copies). Best Use this mode to copy precise images such as photographs. BEST uses the highest resolution and slowest speed. 1 2 3 4 5 6 Press (Copy) to illuminate it in green.
PAGE 88
Enlarging or reducing the image copied You can select the following enlargement or reduction ratios. Custom(25-400%) allows you to enter a ratio from 25% to 400%. Press Copy Options Custom(25-400%) 200% 198% 4"x6"→A4 186% 4"x6"→LTR and or to select 142% A5→A4 Enlarge/Reduce 104% EXE→LTR 100% 97% LTR→A4 93% A4→LTR 83% LGL→A4 78% LGL→LTR 69% A4→A5 50% 1 2 3 4 Press (Copy) to illuminate it in green. Load your document. Use the dial pad to enter the number of copies you want (up to 99).
PAGE 89
5 6 Press ▲ or ▼ to select the enlargement or reduction ratio you want. Press Menu/Set. —OR— You can select Custom(25-400%) and press Menu/Set. Use the dial pad to enter an enlargement or reduction ratio from 25% to 400%. Press Menu/Set. (For example, press 5 3 to enter 53%.) Press Black Start or Color Start. Special Copy Options 2 in 1 (P), 2 in 1 (L), 4 in 1 (P), 4 in 1 (L) or Poster are not available with Enlarge/Reduce.
PAGE 90
Setting paper size If copying on paper other than Letter size, you will need to change the paper size setting. You can copy on Letter, Legal, A4, A5 or Photo Card (4"(W) x 6"(H)) paper. 1 2 3 4 5 6 Press (Copy) to illuminate it in green. Load your document. Use the dial pad to enter the number of copies you want (up to 99). Press Copy Options and ▲ or ▼ to select Paper Size. Press Menu/Set. Press ▲ or ▼ to select the size of paper you are using (Letter, Legal, A4, A5 or 4"(W)x 6"(H)). Press Menu/Set.
PAGE 91
Sorting copies using the ADF (MFC-420CN only) You can sort multiple copies. Pages will be stacked in the order 321, 321, 321, and so on. 1 2 3 4 5 6 Press (Copy) to illuminate it in green. Load your document. Use the dial pad to enter the number of copies you want (up to 99). Press Copy Options and ▲ or ▼ to select Stack/Sort. Press Menu/Set. Press ▲ or ▼ to select Sort. Press Menu/Set. Press Black Start or Color Start.
PAGE 92
Making N in 1 copies or a poster (Page Layout) (MFC-420CN only) You can reduce the amount of copies by using the N in 1 copy feature. This allows you to copy two or four pages on one page, which allows you to save paper. It is also possible to create a poster. When you use the Poster feature your MFC divides your document into sections, then enlarges the sections so you can assemble them into a poster. If you want to print a poster, use the scanner glass. ■ Please make sure Paper Size is set to Letter.
PAGE 93
If you are using the scanner glass: 8 9 10 After the MFC scans the page, Next Page? 1.Yes 2.No the LCD shows: Press 1 to scan the next page. Put the next document on the Set Next Page Then Press Set scanner glass. Press Menu/Set. Repeat Steps 8 and 9 for each page of the layout. After all the pages of the document have been scanned, press 2 to end. If Glossy has been selected in the Paper Type setting for N in 1 copies, the MFC will print the images as if Plain paper had been selected.
PAGE 94
Place document face down in the direction shown below. 2 in 1 (P) 2 in 1 (L) 4 in 1 (P) 4 in 1 (L) Poster (3X3) You can make a poster size copy of a photograph.
PAGE 95
Changing the default copy settings You can save the copy settings you use most often by setting them as default. These settings will remain until you change them again. Increasing copy speed or quality 1 2 3 Press Menu/Set, 3, 1. Press ▲ or ▼ to select Normal, Best or Fast. Press Menu/Set. Press Stop/Exit. Copy 1.Quality Adjusting brightness 1 2 3 Press Menu/Set, 3, 2. Press ▲ to make a lighter copy. —OR— Press ▼ to make a darker copy. Press Menu/Set. Press Stop/Exit. Copy 2.
PAGE 96
Adjusting color saturation 1 2 3 4 Press Menu/Set, 3, 4. Copy 4.Color Adjust Press ▲ or ▼ to select Red, Green or Blue. Press Menu/Set. Press ▲ to increase the color saturation. —OR— Press ▼ to decrease the color saturation. Press Menu/Set. Return to Step 2 to select the next color. —OR— Press Stop/Exit. Out of Memory message If the memory becomes full while you are making copies, the LCD message will guide you through the next step.
PAGE 97
Legal limitations Color reproductions of certain documents are illegal and may result in either criminal or civil liability. This memorandum is intended to be a guide rather than a complete listing of every possible prohibition. In case of doubt, we suggest that you check with counsel as to any particular questionable documents.
PAGE 98
9 Walk-Up PhotoCapture Center™ Introduction Even if your MFC is not connected to your computer, you can print photos directly from the digital camera media. Your Brother MFC includes five media drives (slots) for use with popular digital camera media: CompactFlash®, SmartMedia®, Memory Stick®, SecureDigital™, and xD-Picture Card™.
PAGE 99
PhotoCapture Center™ requirements To avoid error conditions, please remember: ■ The DPOF file on the media card must be in a valid format. (See DPOF printing on page 9-8.) ■ The image file extension must be .JPG (Other image file extensions .JPEG, .TIF, .GIF and so on will not be recognized). ■ Walk-up PhotoCapture Center™ printing must be performed separately from PhotoCapture Center™ operations using the PC. (Simultaneous operation is not available.) ■ IBM Microdrive™ is not compatible with the MFC.
PAGE 100
Getting started Firmly insert the card into the appropriate slot. SecureDigital™ CompactFlash® Memory Stick® xD-Picture Card™ SmartMedia® PhotoCapture key lights: ■ PhotoCapture light is ON, the media card is inserted properly. ■ PhotoCapture light is OFF, the media card is not properly inserted. ■ PhotoCapture light is BLINKING, the media card is being read or written to.
PAGE 101
The steps below give a brief outline of the Direct Printing feature. Please see the remaining pages of this chapter for more detailed instructions. 1 Insert the media card firmly into the media drive (slot). When you insert your media card C.Flash Active Press PhotoCapture key... into the proper slot, the LCD shows. The media active message will be shown for 60 seconds and then disappear. Even in that case, you can enter the PhotoCapture mode by pressing PhotoCapture. 2 3 4 Press PhotoCapture.
PAGE 102
Printing the Index (Thumbnails) The PhotoCapture Center™ assigns numbers for images (such as No.1, No.2, No.3, and so on). It does not recognize any other numbers or file names that your digital camera or PC have used to identify the pictures. You can print a thumbnail page (Index page with 6 or 5 images per line). This will show all the pictures on the media card. 1 2 3 4 Make sure you have inserted the media card. Press PhotoCapture. (See page 9-3.) Press ▲ or ▼ to select Print Index. Press Menu/Set.
PAGE 103
Printing images Before you can print an individual image, you have to know the image number. Print the Index first. (See Printing the Index (Thumbnails) on page 9-5.) 1 2 3 Make sure you have inserted the media card. Press PhotoCapture. (See page 9-3.) Press ▲ or ▼ to choose Print Images. Press Menu/Set. If your media card contains valid DPOF information, the LCD shows DPOF Print:Yes, please go to DPOF printing on page 9-8. Use the dial pad to enter the image Enter & Set Key No.
PAGE 104
Paper Type & Paper Size 5 Press ▲ or ▼ to select the type of paper you are using, Letter Glossy, 4"x 6" Glossy, 5"x 7" Glossy, A4 Glossy, Letter Plain, A4 Plain, Letter Inkjet, A4 Inkjet or 4"x 6" Inkjet. Press Menu/Set. If you selected Letter or A4, go to Step 6. If you selected another size, go to Step 7. —OR— If you have finished choosing settings, press Color Start. Print Size 6 If you selected Letter or A4, press ▲ or ▼ to select the print size (4"x 3", 5"x 3.5", 6"x 4", 7"x 5", 8"x 6" or Max.
PAGE 105
DPOF printing DPOF stands for Digital Print Order Format. Major Digital Camera manufacturers (Canon Inc., Eastman Kodak Company, Fuji Photo Film Co. Ltd., Matsushita Electric Industrial Co. Ltd. and Sony Corporation.) created this standard to make it easier to print images from a digital camera. If your digital camera supports DPOF printing, you will be able to select on the Digital Camera display the images and number of copies you want to print.
PAGE 106
Changing the default settings You can save the PhotoCapture Center™ settings you use most often by setting them as default. These settings will remain until you change them again. Increasing print speed or quality 1 2 3 Press Menu/Set, 4, 1. Press ▲ or ▼ to select Normal or Photo. Press Menu/Set. Press Stop/Exit. PhotoCapture 1.Print Quality Setting the paper & size 1 2 3 Press Menu/Set, 4, 2. PhotoCapture 2.
PAGE 107
Adjusting brightness 1 2 3 Press Menu/Set, 4, 3. Press ▲ to make a lighter print. —OR— Press ▼ to make a darker print. Press Menu/Set. Press Stop/Exit. PhotoCapture 3.Brightness Adjusting contrast You can choose the contrast setting. More contrast will make an image look sharper and more vivid. 1 2 3 Press Menu/Set, 4, 4. Press ▲ to increase the contrast. —OR— Press ▼ to decrease the contrast. Press Menu/Set. Press Stop/Exit. PhotoCapture 4.
PAGE 108
3 4 5 Press ▲ or ▼ to select White Balance, Sharpness or Color Density. Press Menu/Set. Press ▲ or ▼ to adjust the degree of the setting. Press Menu/Set. Press Stop/Exit. ■ White Balance This setting adjusts the hue of the white areas of an image. Lighting, camera settings and other influences will effect the appearance of white. The white areas of a picture may be slightly pink, yellow or some other color. By using this adjustment you can correct this effect and bring the white areas back to pure white.
PAGE 109
Cropping If your photo is too long or wide to fit the available space on your selected layout, part of the image will be automatically cropped. The default setting is On. If you want to print the whole image, turn this setting to Off. 1 2 3 For MFC-210C, press Menu/Set, 4, 5. For MFC-420CN, press Menu/Set, 4, 6. Press ▲ or ▼ to select Off (or On). Press Menu/Set. Press Stop/Exit.
PAGE 110
Understanding the Error Messages Once you are familiar with the types of errors that can occur while you’re using the PhotoCapture Center™, you can easily identify and troubleshoot any difficulties. When an error message appears on the LCD, the MFC will beep to get your attention. Media Error—This message will appear if you insert a media card that is either bad or not formatted, or when there is a problem with the media drive. To clear this error, take out the media card.
PAGE 111
Using PhotoCapture Center™ from your PC You can access the media card that is in the media drive (slot) of the MFC from your PC. (See Using the PhotoCapture Center™ from your PC on page 6-1 in Software User’s Guide on the CD-ROM or Using the PhotoCapture Center™ from a Macintosh® (not available for MFC-3240C and MFC-5440CN) on page 8-47 in the Software User’s Guide on the CD-ROM.
PAGE 112
10 Important information Standard telephone and FCC Notices These notices are in effect on models sold and used in the United States only. When programming emergency numbers or making test calls to emergency numbers: ■ Remain on the line and briefly explain to the dispatcher the reason for the call before hanging up. ■ Perform these activities in the off-peak hours, such as early morning or late evening. This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA.
PAGE 113
If this equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But if advance notice isn’t practical, the telephone company will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary.
PAGE 114
WARNING This MFC has been certified to comply with FCC standards, which are applied to the USA only. A grounded plug should be plugged into a grounded AC power outlet after checking the rating of the local power supply for the MFC to operate properly and safely.
PAGE 115
Important Changes or modifications not expressly approved by Brother Industries, Ltd. could void the user’s authority to operate the equipment. Industry Canada Compliance Statement (Canada only) This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
PAGE 116
Important safety instructions 1 2 3 4 5 6 7 8 9 Read all of these instructions. Save them for later reference. Follow all warnings and instructions marked on the product. Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. Do not use this product near water. Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious damage to the product.
PAGE 117
10 11 12 13 14 Do not allow anything to rest on the power cord. Do not place this product where people can walk on the cord. If an extension cord is used with this product, make sure that the total ampere ratings on the products plugged into the extension cord do not exceed the extension cord ampere rating. Also, make sure that the total of all products plugged into the AC power outlet does not exceed 15 amperes (USA only). Do not place anything in front of the MFC that will block received faxes.
PAGE 118
15 16 Unplug this product from the AC power outlet and refer servicing to Authorized Service Personnel under the following conditions: ■ When the power cord is damaged or frayed. ■ If liquid has been spilled into the product. ■ If the product has been exposed to rain or water. ■ If the product does not operate normally when the operating instructions are followed. Adjust only those controls that are covered by the operating instructions.
PAGE 119
Trademarks The Brother logo is a registered trademark of Brother Industries, Ltd. Brother is a registered trademark of Brother Industries, Ltd. Multi-Function Link is a registered trademark of Brother International Corporation. © 2004 Brother Industries, Ltd. All rights reserved. Windows and Microsoft are registered trademarks of Microsoft in the U.S. and other countries. Macintosh and TrueType are registered trademarks of Apple Computer, Inc.
PAGE 120
and routine 11 Troubleshooting maintenance Troubleshooting IMPORTANT For technical help, you must call the country where you bought the MFC. Calls must be made from within that country. Error messages As with any sophisticated office product, errors may occur. If this happens, your MFC identifies the problem and displays an error message. The most common error messages are shown below. You can correct most problems by yourself.
PAGE 121
ERROR MESSAGES ERROR MESSAGE CAUSE ACTION Document Jam (MFC-420CN only) The document scanned from ADF was longer than about 35.4 inches. See Using the automatic document feeder (ADF) (Not available for MFC-210C) on page 1-6. The document is jammed in the MFC. See Document jams (MFC-420CN only) on page 11-5. DR Mode in Use The MFC is set to Distinctive Ring mode. You can not change the Receive Mode from Manual to another mode. Set Distinctive Ring to Off.
PAGE 122
ERROR MESSAGES ERROR MESSAGE CAUSE ACTION No Paper Fed The MFC is out of paper. Add paper, and then press Black Start or Color Start. The paper is jammed in the MFC. See Printer jam or paper jam on page 11-6. No Response/Busy The number you dialed does not answer or is busy. Verify the number and try again. Not Registered You tried to access a Speed Dial number that is not programmed. Set up the Speed Dial number. (See Storing Speed-Dial numbers on page 5-1.
PAGE 123
ERROR MESSAGES ERROR MESSAGE CAUSE ACTION Unable to Change The MFC has a mechanical problem. —OR— A foreign obstacle, such as a clip or ripped paper, is in the MFC. Open the scanner cover and remove any foreign obstacles from inside the MFC. If the error message continues, please follow the steps below before disconnecting the MFC so you will not lose any important messages. Then, disconnect the MFC from the power source for several minutes (which will erase all faxes), and then reconnect it.
PAGE 124
Document jams (MFC-420CN only) If the document is jammed, follow the steps below. Document is jammed in the top of the ADF unit. 1 2 3 Take out any paper from the ADF that is not jammed. Open the ADF cover. Pull the jammed document out to the right or left. 4 Close the ADF cover. Press Stop/Exit. Document is jammed inside the ADF unit. 1 2 3 Take out any paper from the ADF that is not jammed. Lift the document cover. Pull the jammed document out to the left. 4 Close the document cover.
PAGE 125
Printer jam or paper jam Remove the jammed paper depending on where it is jammed in the MFC. Paper is jammed inside the paper tray 1 Pull the paper tray out of the MFC. Paper Tray 2 Pull out the jammed paper to remove it.
PAGE 126
Paper is jammed inside the MFC 1 Remove the jam clear cover. Pull the jammed paper out of the MFC. Jam Clear Cover 2 3 4 Re-insert the jam clear cover. If you can not pull out the jammed paper, lift the scanner cover from the right-hand side of the MFC until it locks securely into the open position. Remove the jammed paper. Scanner Cover If the paper is jammed underneath the print head, disconnect the MFC from the power source so you can move the print head to take out the paper.
PAGE 127
5 Lift the scanner cover to release the lock. Gently push the scanner cover support down and close the scanner cover.
PAGE 128
If you are having difficulty with your MFC If you think there is a problem with your MFC, check the chart below and follow the troubleshooting tips. The Brother Solutions Center offers the latest FAQs and troubleshooting tips. Visit us at http://solutions.brother.com. DIFFICULTY SUGGESTIONS Printing No printout Check the interface cable connection on both the MFC and your computer. Check the MFC is plugged in and On/Off key turned On. One or more ink cartridges are empty.
PAGE 129
DIFFICULTY SUGGESTIONS Printing (Continued) Smudged stain at the top center of the printed page. Make sure the paper is not too thick or not curled. (See About paper on page 1-9.) Printing appears dirty or ink seems to run. Make sure you are using the proper types of paper. (See About paper on page 1-9.) Don’t handle the paper until the ink is dry. Stains appear on the reverse side or at the bottom of the page. Make sure the Printer Platen is not dirty with ink.
PAGE 130
DIFFICULTY SUGGESTIONS Printing Received Faxes (Continued) Received color fax prints only in black and white. Replace the color ink cartridges that are empty or nearly empty, and then ask the other person to send the color fax again. (See Replacing the ink cartridges on page 11-24.) For MFC-420CN, check that Fax Storage is not turned on. (See Setting Fax Storage on page 6-3.) Left and Right margins are cut off or a single page is printed on two pages. Turn on Auto Reduction.
PAGE 131
DIFFICULTY SUGGESTIONS Handling Incoming Calls MFC ‘Hears’ Voice as CNG Tone. If your MFC is set to Easy Receive On, it is more sensitive to sounds. Your MFC may mistakenly interpret certain voices or music on the line as a calling fax machine and respond with fax receiving tones. Deactivate the fax by pressing Stop/Exit. Try avoiding this problem by turning Easy Receive to Off. (See Easy Receive on page 4-4.) Transferring a Fax Call to the MFC.
PAGE 132
DIFFICULTY SUGGESTIONS PhotoCapture Center™ Difficulties Removable Disk does not work properly. a)Have you installed the Windows® 2000 update? If not, do the following: 1. Disconnect the USB cable. 2. Install the Windows® 2000 update. Please see the Quick Setup Guide. After the installation the PC will be automatically restarted. 3. Wait about 1 minute after you reboot the PC, and then connect the USB cable. b)Take out the media card and put it back in again.
PAGE 133
How to improve print quality Cleaning the print head To ensure good print quality, the MFC will regularly clean the print head. You can start the cleaning process manually if needed. Clean the print head and ink cartridges if you get a horizontal line in the text or graphics on your printed pages. You can clean Black only or three colors at a time (Cyan/Yellow/Magenta), or all four colors at once. Cleaning the print head consumes ink. Cleaning too often uses ink unnecessarily.
PAGE 134
Checking the print quality If faded or streaked colors and text appears on your output, some of the nozzles may be clogged. You can check this by printing the Print Quality Check Sheet and looking at the nozzle check pattern. 1 Press Ink. 2 Press ▲ or ▼ to select Test Print. Press Menu/Set. 3 Press ▲ or ▼ to select Print Quality. Press Menu/Set. 4 Press Color Start. The MFC begins printing the Print Quality Check Sheet.
PAGE 135
8 Press 2 (No) for Black or three colors with a problem. Start Cleaning? The LCD shows: 1.Yes 2.No Press 1 (Yes). The MFC will start cleaning the print head. 9 After cleaning is finished, press Color Start. The MFC will start printing the Print Quality Check Sheet again and then return to step 5. 10 Press Stop/Exit. If you still see missing ink in this Print Quality Check Sheet, repeat the cleaning and test print procedures at least five times.
PAGE 136
Checking the printing alignment You should rarely need to adjust the printing alignment however, if after transporting the machine your printed text becomes blurred or images become faded then adjustment may need to be made. 1 Press Ink. 2 Press ▲ or ▼ to select Test Print. Press Menu/Set. 3 Press ▲ or ▼ to select Alignment. Press Menu/Set. 4 Press Black Start or Color Start. The MFC begins printing the Alignment Check Sheet. The LCD shows: Is Alignment OK? 1.Yes 2.
PAGE 137
Checking the ink volume You can check the ink that is left in the cartridge. 1 Press Ink. 2 Press ▲ or ▼ to select Ink Volume. Press Menu/Set. 3 Press ▲ or ▼ to select the color you Ink Volume Bk:want to check. The LCD shows the ink volume. 4 Press Stop/Exit. + You can check the ink volume from your computer. (See MFC Remote Setup (not available for DCP-110C and MFC-210C) on page 4-1 in Software User’s Guide on the CD-ROM or MFC Remote Setup (Mac OS® X 10.2.
PAGE 138
Packing and shipping the MFC Whenever you transport the MFC, use the packing materials that came with your MFC. If you do not pack the MFC properly, you could void your warranty. Caution It is important to allow the MFC to ‘park’ the print head after a print job. Listen carefully to the MFC before disconnecting it from the power source to ensure that all mechanical noise has stopped. Not allowing the MFC to complete this parking process may lead to print problems and possible damage to the print head.
PAGE 139
3 Lift the scanner cover to release the lock. Gently push the scanner cover support down and close the scanner cover. 4 Unplug the MFC from the telephone wall jack and remove the telephone line cord from MFC. Unplug the MFC from the AC power outlet. Unplug the USB cable or LAN cable from the MFC, if it is connected. 5 6 7 Wrap the MFC in the bag and place it in the original carton with the original packing material.
PAGE 140
8 Pack the printed materials in the original carton as shown below. Do not pack the used ink cartridges in the carton. If you are returning your machine to Brother as part of the Exchange Service, pack only the MFC. Keep all separate parts and printed materials to use with your “Exchange” machine. (For Canada) 9 (For USA) Close the carton.
PAGE 141
Routine maintenance Cleaning the scanner Unplug the MFC and lift the document cover. Clean the scanner glass with isopropyl alcohol on a soft lint-free cloth. Document Cover Clean the white bar and the glass strip under the film with isopropyl alcohol on a lint-free cloth.
PAGE 142
Cleaning the MFC printer platen ■ Be careful not to touch the paper feed star wheels or encoder film. ■ Be sure to unplug the MFC from the AC power outlet before cleaning the printer platen. ■ If ink is scattered on or around the printer platen be sure to wipe it off with a soft, dry, lint-free cloth.
PAGE 143
Replacing the ink cartridges Your MFC is equipped with an ink dot counter. The ink dot counter automatically monitors the level of ink in each of the 4 cartridges. When the MFC detects an ink cartridge is running out of ink, the MFC will notify you with a message on the LCD. The LCD will inform you which ink cartridge is low or needs replacing. Be sure to follow the LCD prompts to replace the ink cartridges in the correct order.
PAGE 144
4 Remove the cartridge covers. Cartridge Cover DO NOT TOUCH Do not touch the area shown in the illustration above. If the cartridge cover comes off when you open the bag the cartridge will not be damaged. 5 Each color has its own correct position. Keep the ink cartridge in an upright position when you insert it into slot. Press down on the ink cartridge until the hook snaps over it. New Ink Cartridge Ink Cartridge Hook 6 Lift the scanner cover to release the lock.
PAGE 145
7 If you replaced an ink cartridge while Near Empty was displayed on the LCD, the LCD may ask you to verify that it was a brand new one. Example: Did You Change Blck? 1.Yes 2.No. For each new cartridge you installed, press 1 on the dial pad to automatically reset the ink dot counter for that color. If the ink cartridge you installed is not a brand new one, please be sure to select 2. If you wait until Ink Empty message is displayed on the LCD, the MFC will automatically reset the ink dot counter.
PAGE 146
Caution ■ Do not remove ink cartridges if you do not need to replace them. If you do so, it may reduce the ink quantity and the MFC will not know the quantity of ink left in the cartridge. ■ Do not touch the cartridge insertion slots. If you do so, the ink may stain your skin. ■ If ink stains your skin or clothing, wash with soap or detergent immediately.
PAGE 147
A Appendix A Setting up telephone services Your MFC supports the Distinctive Ring and Caller ID subscriber telephone services that some telephone companies offer. If you have Voice Mail, Call Waiting, Call Waiting/Caller ID, RingMaster, an answering service, an alarm system or other custom features on your telephone line, it may affect the way your MFC works. (See Custom features on page 1-18 and Custom features on a single line. on page 11-12.
PAGE 148
What does Brother’s ‘Distinctive Ring’ do? The Brother MFC has a Distinctive Ring feature that allows you to use your MFC to take full advantage of the telephone company’s Distinctive Ring service. The new phone number on your line can just receive faxes. You must pay for your telephone company’s Distinctive Ring service before you program the MFC to work with it.
PAGE 149
Before you choose the ring pattern to register You can only register one Distinctive Ring pattern with the MFC. Some ring patterns cannot be registered. The ring patterns below are supported by your Brother MFC. Register the one your telephone company gives you. Ring Pattern Rings 1 long-long 2 short-long-short 3 short-short-long 4 very long (normal pattern) If the ring pattern you received is not on this chart, please call your telephone company and ask for one that is shown.
PAGE 150
Registering the Distinctive Ring pattern Very important! After you have set the Distinctive Ring feature to ON, the receive mode is set to Manual automatically. Unless you have a TAD or Voice Mail set up on the Distinctive Ring number, Manual mode means you must answer all the calls yourself. You can not change the receive mode to another mode while the Distinctive Ring is set to on. 1 2 3 4 Press Menu/Set, 2, 0, 2. Miscellaneous 2.Distinctive Press ▲ or ▼ to select Set. Press Menu/Set.
PAGE 151
Caller ID The Caller ID feature lets you use the Caller ID subscriber service offered by many local telephone companies. This service displays the telephone number, or name if it is available, of your caller as the line rings. After a few rings, the LCD shows the telephone number of your caller (and name, if available). Once you pick up the handset, the Caller ID information disappears from the LCD, but the call information remains stored in the Caller ID memory.
PAGE 152
Viewing Caller ID List Caller ID memory stores information for up to thirty calls. When the thirty-first call comes in, information about the first call is erased. You can scroll through Caller ID information to review those calls made to your MFC. 3 4 Press Menu/Set, 2, 0, 3. Miscellaneous 3.Caller ID Press ▲ or ▼ to select Display#. Press Menu/Set. If the name was not received, it will not be displayed.
PAGE 153
Advanced receiving operations Operation from extension telephones If you answer a fax call on an extension telephone, or an external telephone in the EXT. jack of the MFC, you can make your MFC take the call by using the Fax Receive Code. When you press the Fax Receive Code 51, the MFC starts to receive a fax. (See Easy Receive on page 4-4.) If the MFC answers a voice call and pseudo/double-rings for you to take over, use the Telephone Answer Code #51 to take the call at an extension phone.
PAGE 154
Using a cordless external handset If your cordless telephone is connected to the EXT. jack on the MFC and you typically carry the cordless handset elsewhere, it is easier to answer calls during the Ring Delay. If you let the MFC answer first, you will have to go to the MFC so you can press Hook to transfer the call to the cordless handset. Changing the remote codes Remote Codes might not work with some telephone systems. The preset Fax Receive Code is 51. The preset Telephone Answer Code is #51.
PAGE 155
Connecting an external device to your MFC Connecting an external telephone You can connect a separate telephone (or telephone answering device) directly to your MFC as shown in the diagram below. Connect the telephone line cord to the jack labeled EXT. in the left of the MFC. Extension Telephone External Telephone When you are using a TAD, the LCD shows Ext. Tel in Use.
PAGE 156
Connecting an external telephone answering device (TAD) Sequence You may choose to connect an additional answering device. However, when you have an external TAD on the same telephone line as the MFC, the TAD answers all calls and the MFC “listens” for fax calling (CNG) tones. If it hears them, the MFC takes over the call and receives the fax. If it does not hear CNG tones, the MFC lets the TAD continue playing your outgoing message so your caller can leave you a voice message.
PAGE 157
If You Do Not Subscribe to Distinctive Ring Service: You must plug your TAD into the EXT. jack of your MFC. If your TAD is plugged into a wall jack, both your MFC and the TAD will try to control the phone line. (See illustration below.) Unless you are using Distinctive Ring, do not connect a TAD elsewhere on the same phone line. TAD TAD When you are using a TAD, the LCD shows Telephone.
PAGE 158
Connections The external TAD must be plugged into the back of the MFC, into the jack labeled EXT. Your MFC cannot work properly if you plug the TAD into a wall jack (unless you are using Distinctive Ring). 1 2 3 4 5 6 Plug the telephone line cord from the telephone wall jack into the back of the MFC, in the jack labeled LINE. Plug the telephone line cord from your external TAD into the back of the MFC, in the jack labeled EXT.
PAGE 159
Special line considerations Roll over phone lines A roll over phone system is a group of two or more separate telephone lines that pass incoming calls to each other if they are busy. The calls are usually passed down or “rolled over” to the next available phone line in a preset order. Your MFC can work in a roll over system as long as it is the last number in the sequence, so the call cannot roll away.
PAGE 160
Converting telephone wall outlets There are three ways to convert to an RJ11 jack. The first two ways may require assistance from the telephone company. You can change the wall outlets from one RJ14 jack to two RJ11 jacks. Or, you can have an RJ11 wall outlet installed and slave or jump one of the phone numbers to it. The third way is the easiest: Buy a triplex adapter. You can plug a triplex adapter into an RJ14 outlet.
PAGE 161
Installing MFC, external two-line TAD and two-line telephone When you are installing an external two-line telephone answering device (TAD) and a two-line telephone, your MFC must be isolated on one line at both the wall jack and at the TAD. The most common connection is to put the MFC on Line 2, which is explained in the following steps. The back of the two-line TAD must have two telephone jacks: one labeled L1 or L1/L2, and the other labeled L2.
PAGE 162
Multi-line connections (PBX) Most offices use a central telephone system. While it is often relatively simple to connect the MFC to a key system or a PBX (Private Branch Exchange), we suggest that you contact the company that installed your telephone system and ask them to connect the MFC for you. It is advisable to have a separate line for the MFC. If the MFC is to be connected to a multi-line system, ask your installer to connect the unit to the last line on the system.
PAGE 163
B Appendix B On-screen programming Your MFC is designed to be easy to use with LCD on-screen programming using the navigation keys. User-friendly programming helps you take full advantage of all the menu selections your MFC has to offer. Since your programming is done on the LCD, we have created step-by-step on-screen instructions to help you program your MFC. All you need to do is follow the instructions as they guide you through the menu selections and programming options.
PAGE 164
Navigation keys Access the menu Go to the next menu level Accept an option Scroll through the current menu level Go back to the previous menu level Exit the menu .... You can access the menu mode by pressing Menu/Set. When you enter the menu, the LCD scrolls. Press 1 for General Setup menu Select ▲▼ & Set 1.General Setup —OR— Press 2 for Fax menu Select ▲▼ & Set 2.Fax —OR— Press 3 for Copy menu Select ▲▼ & Set Press 0 for Initial Setup 3.Copy Select ▲▼ & Set 0.
PAGE 165
Select & Set to accept Select & Set to exit Main Menu Submenu Menu Selections Options Descriptions Page 1.General Setup 1.Mode Timer — 5 Mins 2 Mins 1 Min 30 Secs 0 Sec Off Sets the time to return to Fax mode. 2-3 2.Paper Type — Plain Inkjet Glossy Transparency Sets the type of paper in the paper tray. 2-3 3.Paper Size — Letter Legal A4 A5 4"x6" Sets the size of the paper in the paper tray. 2-4 4.Volume 1.Ring High Med Low Off Adjusts the ring volume. 2-4 2.
PAGE 166
Main Menu Submenu Menu Selections Options Descriptions Page 2.Fax 1.Setup Receive (In Fax mode only) 1.Ring Delay 04 03 02 01 00 Sets the number of rings before the MFC answers in Fax Only or Fax/Tel mode. 4-2 2.F/T Ring Time 70 40 30 20 Sets the pseudo/double-ring time in Fax/Tel mode. 4-3 3.Easy Receive On Off Receives fax messages without pressing the Black Start or Color Start key. 4-4 4.
PAGE 167
Main Menu Submenu Menu Selections Options Descriptions Page 2.Fax (Continued) 2.Setup Send (In Fax mode only) (Continued) 3.Real Time TX (MFC-210C only) 5.Real Time TX (MFC-420CN only) Off On Next Fax Only You can send a fax without using the memory. 3-9 6.Polled TX (MFC-420CN only) On Off Sets up your MFC with an document to be retrieved by another fax machine. 3-13 4.Overseas Mode (MFC-210C only) 7.
PAGE 168
Main Menu Submenu Menu Selections Options Descriptions Page 2.Fax (Continued) 5.Remote Fax Opt (MFC-420CN only) 1.Fwd/Page/ Store Off Fax Forward Paging Fax Storage PC Fax Receive Sets the MFC to forward fax messages, to call your pager, to store incoming faxes in the memory (so you can retrieve them while you are away from your MFC), or to send faxes to your PC. 6-1 6-2 2.Remote Access --- You must set your own code for Remote Retrieval. 6-4 3.
PAGE 169
Main Menu Submenu Menu Selections Options 3.Copy (Continued) 4.Color Adjust 1.Red R:R:R:R:R:- 2.Green 4.PhotoCapture Descriptions Page + + + + + Adjusts the amount of Red in copies. 8-14 G:G:G:G:G:- + + + + + Adjusts the amount of Green in copies. 3.Blue B:B:B:B:B:- + + + + + Adjusts the amount of Blue in copies. 1.Print Quality — Normal Photo Selects the print quality. 9-9 2.
PAGE 170
Main Menu Submenu Menu Selections Options Descriptions Page 4.PhotoCapture (Continued) 5.True2Life (MFC-420CN only) True2Life:On True2Life:Off 1.White Balance + + + + + Adjusts the hue of the white areas. 9-10 2.Sharpness + + + + + Enhances the detail of the image. 3.Color Density + + + + + Adjusts the total amount of color in the image. 5.Cropping (MFC-210C only) 6.Cropping (MFC-420CN only) — On Off Crops the image around the margin to fit the paper size or print size.
PAGE 171
Main Menu Submenu Menu Selections Options Descriptions 5.LAN (MFC-420CN only) 1.Setup TCP/IP 1.BOOT Method Auto Static RARP BOOTP DHCP You can choose the BOOT method that best suits you needs. 2.IP Address [000-255]. [000-255]. [000-255]. [000-255] Enter the IP address. 3.Subnet Mask [000-255]. [000-255]. [000-255]. [000-255] Enter the Subnet mask. 4.Gateway [000-255]. [000-255]. [000-255]. [000-255] Enter the Gateway address. 5.Host Name BRN_XXXXXX Enter the Host name. 6.
PAGE 172
Main Menu Submenu Menu Selections Options Descriptions Page 5.Print Reports (MFC-210C only) 6.Print Reports (MFC-420CN only) 1.Help List — — — — You can print these lists and reports. 7-3 2.Quick-Dial 3.Fax Journal — — 0.Initial Setup 4.Transmission — — 5.User Settings (MFC-420CN only) — — 6.Network Config (MFC-420CN only) — — 1.Receive Mode — Fax Only Fax/Tel External TAD Manual You can choose the receive mode that best suits your needs. 4-1 4-2 2.
PAGE 173
Entering Text When you are setting certain menu selections, such as the Station ID, you may need to type text into the MFC. Most number keys have three or four letters printed above them. The keys for 0, # and do not have printed letters because they are used for special characters. By pressing the appropriate number key repeatedly, you can access the character you want.
PAGE 174
Special characters and symbols Press , # or 0, and then press or ▲ ▲ to move the cursor under the special character or symbol you want. Then press Menu/Set to select it. Press for (space) ! " # $ % & ’ ( ) Press # for :;<=>?@[]^_ Press 0 for ÉÀÈÊÎÇËÖ0 B - 12 APPENDIX B +,-.
PAGE 175
G Glossary ADF (automatic document feeder) (MFC-420CN only) The document can be placed in the ADF and scanned one page at a time automatically. Auto Reduction Reduces the size of incoming faxes. Automatic fax transmission Sending a fax without picking up the handset of an external phone. Automatic Redial A feature that enables your MFC to redial the last fax number after five minutes if the fax did not go through because the line was busy.
PAGE 176
Coding method Method of coding the information contained in the document. All fax machines must use a minimum standard of Modified Huffman (MH). Your MFC is capable of greater compression methods, Modified Read (MR), Modified Modified Read (MMR) and JPEG, if the receiving machine has the same capability. Communication error (or Comm. Error) An error during fax sending or receiving, usually caused by line noise or static. Compatibility group The ability of one fax unit to communicate with another.
PAGE 177
Fax Journal Lists information about the last 200 incoming and outgoing faxes. TX means Transmit. RX means Receive. Fax Receive Code Press this code ( 5 1) when you answer a fax call on an extension or external phone. Fax Storage (MFC-420CN only) You can store faxes in memory. Fax tones The signals sent by sending and receiving fax machines while communicating information. Fax/Tel You can receive faxes and telephone calls. Do not use this mode if you are using a telephone answering device (TAD).
PAGE 178
Overseas Mode Makes temporary changes to the fax tones to accommodate noise and static on overseas phone lines. Paging (MFC-420CN only) This feature enables your MFC to call your pager when a fax is received into its memory. Pause Allows you to place a 3.5 second delay in the dialing sequence stored on Speed-Dial numbers. Press Redial/Pause as many times as needed for longer pauses.
PAGE 179
Scan to Card (MFC-420CN) You can scan a black and white or color document into a Media Card. Black and white images will be in TIFF or PDF file format and color images may be in PDF or JPEG file format. Search An electronic, alphabetical listing of stored Speed-Dial and Group numbers. Speed-Dial A pre-programmed number for easy dialing. You must press the Search/Speed Dial, #, and the two digit code, and Black Start or Color Start to start the dialing process. Standard resolution 203 x 97 dpi.
PAGE 180
S Specifications Product description General Memory Capacity 8 MB (MFC-210C) 16 MB (MFC-420CN) Automatic Document Feeder (ADF) (MFC-420CN only) Up to 10 pages Paper Tray 100 Sheets (20 lb) Printer Type Ink Jet Print Method Piezo with 74 × 5 nozzles LCD (Liquid Crystal Display) 16 characters × 1 line (MFC-210C) 16 characters × 2 lines (MFC-420CN) Power Source 100 - 120V AC 50/60Hz Power Consumption (MFC-210C) Off Mode: Standby: Operating: Under 3 watts 7 Wh or less (25°C ) 20 Wh or less (M
PAGE 181
Weight 11 lb (5 kg) (MFC-210C only) 13.2 lb (6 kg) (MFC-420CN only) Noise Operating: Temperature Operating: Best Print Quality: 50°F - 95°F (10°C - 35°C) Operating: Best Print Quality: 20 to 80% (without condensation) 42.
PAGE 182
Copy Color/Black Color/Black Document Size (MFC-420CN only) ADF Width: 5.8" to 8.5" ADF Height: 5.8" to 14" Scanner Glass Width: 8.5 in. Scanner Glass Height: 11.7 in. Document Size (MFC-210C only) Scanner Glass Width: Scanner Glass Height: Copy Speed Mono Up to 17 pages/minute (Letter paper)* Color Up to 11 pages/minute (Letter paper)* 8.5 in. 11.7 in. * Does not include the time it takes to feed the paper. Based on Brother standard pattern.
PAGE 183
PhotoCapture Center Available Media File Extension (Media Format) (Image Format) CompactFlash® (Type I only) (Microdrive™ is not compatible) (Compact I/O card such as Compact LAN card and Compact Modem card are not supported.) SmartMedia® (3.
PAGE 184
Fax Compatibility ITU-T Group 3 Coding System MH/MR/MMR/JPEG Modem Speed Automatic Fallback 14400 bps Document Size (MFC-420CN only) ADF Width: 5.8" to 8.5" ADF Height: 5.8" to 14" Scanner Glass Width: 8.5 in. Scanner Glass Height: 11.7 in. Document Size (MFC-210C only) Scanner Glass Width: 8.5 in. Scanner Glass Height: 11.7 in. Scanning Width 8.2 in. Printing Width 8.03 in.
PAGE 185
Communication Source Public switched telephone network. Memory Transmission Up to 200*1/170*2 pages (MFC-210C) Up to 480*1/400*2 pages (MFC-420CN only) Out of Paper Reception Up to 200*1/170*2 pages (MFC-210C) Up to 480*1/400*2 pages (MFC-420CN only) *1 “Pages” refers to the “Brother Standard Chart No. 1” (a typical business letter, Standard resolution, MMR code). Specifications and printed materials are subject to change without prior notice.
PAGE 186
Printer Printer Driver Windows® 98/98SE/Me/2000 Professional and XP driver supporting Brother Native Compression mode and bi-directional capability Apple® Macintosh® QuickDraw® Driver For Mac OS® 8.6-9.2/Mac OS® X 10.2.4 or greater Resolution Up to 1200 x 6000 dots per inch (dpi)* 1200 x 1200 dots per inch (dpi) 600 x 600 dots per inch (dpi) 600 x 150 dots per inch (dpi) * Output image quality varies based upon many factors including but not limited to input image resolution and quality and print media.
PAGE 187
Computer requirements Minimum System Requirements Computer Platform & Operating System Version Windows® *1 Operating System 98, 98SE Me 2000 Professional XP*2 Apple® Macintosh ® Operating System Mac OS® 8.
PAGE 188
Consumable items Ink The MFC uses individual Black, Yellow, Cyan and Magenta ink cartridges that are separate from the print head assembly.
PAGE 189
Network (LAN) (MFC-420CN only) LAN You can connect your MFC to a network for Network Printing, Network Scanning and PC Fax Send. Also included is Brother BRAdmin Professional Network Management software. Support for Windows® 98/98SE/Me/2000/XP Mac OS® 8.6 - 9.2, Mac OS® X 10.2.4 or greater* Ethernet 10/100 BASE-TX Auto Negotiation Protocols TCP/IP RARP, BOOTP, DHCP, APIPA, NetBIOS, WINS LPR/LPD, Port9100, mDNS, FTP * Network Printing and PC-FAX are available for Mac OS® 8.6-9.2, Mac OS® 10.2.
PAGE 190
Optional External Wireless Print/Scan Server (NC-2200w) NC-2200w External Wireless Print/Scan Server (Optional) Connecting the optional External Wireless Print/Scan Server (NC-2200w) to your MFC will allow you to print and scan over a wireless network. Network types IEEE 802.11b wireless LAN Support for Windows® 98/98SE/Me/2000/XP Mac OS® X 10.2.
PAGE 191
Index A Access codes, storing and dialing ................................ 5-5 Accessories and supplies .......ii ADF (automatic document feeder) ........................1-6, 3-3 ADF cover ......................... 11-5 Answering machine (TAD) ..A-10 connecting ......................A-12 Automatic fax receive ........................ 4-1 Easy Receive ................ 4-4 fax redial ........................... 3-2 transmission ..................... 3-5 B Broadcasting .....................
PAGE 192
Credit card numbers ........... 5-5 Custom telephone features on a single line .....11-12, A-16 D Date and Time .................... 2-1 Delayed Batch Transmission .................. 3-14 Dialing a pause ............................ 5-5 access codes and credit card numbers ................. 5-5 automatic fax redial ......... 3-2 automatic transmission .... 3-5 Groups ........................... 3-11 manual ............................. 3-1 Speed-Dial ....................... 3-2 Distinctive Ring ...........
PAGE 193
enter Fax mode ............. 3-1 from memory (Dual Access) .......3-2, 3-8 from pc see Software User’s Guide on the CD-ROM. ............. from scanner glass ........3-4 manual ........................... 3-5 overseas ...................... 3-12 Real Time Transmission ... 3-9 resolution ....................... 3-7 Fax/Tel mode answering at extension phones ...........................A-7 double-ringing (voice calls) .................... 4-3 F/T Ring Time .................. 4-3 Fax Receive Code ............
PAGE 194
P Paging ................................ 6-2 programming your pager number ........................... 6-1 Paper ...........................1-9, S-2 document size ................. 3-3 Size .................................. 2-4 size of document ............. 1-6 Type ................................. 2-3 PC Fax Receive ................. 6-3 PC Faxing see Software User’s Guide on the CD-ROM. ........................ Phone line connections ................... A-12 difficulties .....................
PAGE 195
Remote Retrieval ................ 6-5 access code ..............6-4, 6-5 commands ........................ 6-6 getting your faxes ............. 6-7 Reports ............................... 7-1 Caller ID List .....................A-6 Fax Journal ...................... 7-3 Journal Period ...............7-2 Help List ........................... 7-3 how to print ....................... 7-3 Network Configuration ...... 7-3 Quick-Dial List .................. 7-3 Transmission Verification ...............
PAGE 196
V Volume, setting ................... 2-4 beeper ............................. 2-5 ring ................................... 2-4 speaker ............................ 2-5 W Warranties ............................. iii Canada ............................... vi Notice-Disclaimer ............... iii USA .................................... iv World Wide Web .....................
PAGE 197
Press 9 0. EXIT REMOTE OPERATION Press 9 8 then for External TAD, press 1. Fax/Tel, press 2. Fax Only, press 3. CHANGE RECEIVE MODE 1 long beep — Fax messages 3 short beeps — No messages Press 9 7 1 CHECK RECEIVING STATUS 4 Using Remote Access Code 1 Dial your fax number from a telephone or fax machine using touch tone. 2 When your machine answers, immediately enter your Remote Access Code (3 digits followed by ).
PAGE 198
Changing Remote Access Code The cannot be changed. 1 Press Menu/Set, 2, 5, 2. 2 Enter a three-digit number from 000 to 999. 3 Press Menu/Set. 4 Press Stop/Exit. Remote Commands CHANGE PAGING/FAX FORWARDING SETTING Press 9 5. then to Turn feature Off, press 1. Select Fax Forwarding, press 2. Select Paging, press 3. 2 Program Fax Forwarding Number, press 4. Enter the new fax number where you want your fax messages forwarded followed by . Turn Fax Storage On, press 6.
PAGE 199
EQUIPMENT ATTACHMENT LIMITATIONS (Canada only) NOTICE This product meets the applicable Industry Canada technical specifications. NOTICE The Ringer Equivalence Number is an indication of the maximum number of devices allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the RENs of all the devices does not exceed five.
PAGE 200
® Brother International Corporation 100 Somerset Corporate Boulevard P.O. Box 6911 Bridgewater, NJ 08807–0911 USA Brother International Corporation (Canada) Ltd. 1 rue Hôtel de Ville, Dollard-des-Ormeaux, QC, CANADA H9B 3H6 Visit us on the World Wide Web http://www.brother.com These machines are made for use in the USA and Canada only.