Owner's Manual

Programmer
87
Chapter 2 Programming with Help Function
Remaining plot count
Distance from the previous point in the
direction of X or Y axis
Stitch length
4. Select the third point and press .
Creating a semicircle
The following two options are available for creating a semicircle.
Creating a semicircle of the specified diameter in the clockwise direction
Creating a semicircle of the specified diameter in the counterclockwise direction
1. Select and press .
2. Select the method of creating a semicircle, then press .
3. Input the stitch length, then press .
4. Move the needle with and press .