Owner's Manual

Programmer
110
Chapte 2 Programming with Help Function
Setting the attribute (split data)
1. Move to the desired needle position and press .
The attribute setting screen appears.
2. Set the attribute.
3. Press after setting.
The screen returns to the confirmation screen.
Setting the attribute (trigger data)
1. Move to the desired needle position and press .
The attribute setting screen appears.
2. Set the attribute.
3. Press after setting.
The screen returns to the confirmation screen.
Stoppage of the needle at the lower end
Press to select ON/OFF.
Machine stop
Press to select ON/OFF.
Extended option output trigger
Press or
0
-
9
to select the number.