Service manual

REPAIR
Troubleshooting
SERVICE MANUAL
3-16
•
The following printing pattern is printed:
•
•
The serial number is printed on the first line (if it was entered), and then 59 lines of
characters are printed at 64 characters per line; with each line beginning with one
character from the right of the previous line.
•
If the CANCEL is pressed while the serial number input screen is displayed, the input
character string will not be registered as a serial number and display will return to the
Main Menu screen.
•
If the SPACE BAR or CANCEL key is pressed during printing, self printing is
suspended and the pop-up screen shown below is displayed:
[YES]
OK to cancel printing?
Use cursor to select and press RETURN.
[NO]
•
If RETURN is entered while the cursor is located at "YES", self-printing is canceled and
the display returns to the Main Menu.
•
If RETURN is pressed while the cursor is located at "NO", self-printing is resumed.
LM
RM
1 inch
6.4 inches
[Memory Codes 21(H) to 7E(H) printed]