Service manual

REPAIR
SERVICE MANUAL
Mechanical
5-1
CHAPTER 5 MAINTENANCE
1. Lubrication
1.1. Lubricants
Table 5.1 Recommended Lubricants
Symbol Lubricant
E Epinoc grease #1
S1 Silicone grease G-501
S2 Silicone grease KS64F
SO Silicone oil KF96
T FBK Turbin#32
1.2. Precautions
1. Lubricate carefully so that the oil or grease will not stick to places other than the
specified points; otherwise, the plastic parts and electronic boards will be adversely
affected.
2. Do not apply an excessive amount of lubricant; otherwise, the lubricant may drip
onto places other than the specified lubrication points during use or storage.
3. Make sure to apply a sufficient amount of lubricant to contact parts and sliding
surfaces consisting of more than one material.
1.3. Lubrication Points
See the illustrations on the following pages for location and types of lubricant for the
following components:
NOTE:
• Some assemblies must be disassembled for lubrication.
1. Carriage Assembly (see Fig. 5.1.)
2. Paper Feed Assembly (see Fig. 5.2.)
3. Eject Roller Assembly and PF Roller Assembly (see Fig. 5.3.)