Manualshelf

Service manual

ManualsBrandsBrother ManualsComputer equipmentLW-810icBL
151152153154155156157158159160
REPAIR
SERVICE MANUAL
Mechanical
4-37
5.3.3.5. Removing the Holder Plate
(1) Unsnap the two hooks in the PF base assembly to disengage the holder plate from
the PF base assembly. Then, lift the holder plate away from the PF base assembly
upward by tilting it towards you.
(2) Remove the screw and then the ACF shaft stopper.
Fig. 4.29 Removing the Holder Plate