Service manual

REPAIR
SERVICE MANUAL
Mechanical
4-31
5.3.1. Removing the CA Unit
(1) Remove the earth spring.
(2) Remove the two screws from the CA unit.
(3) Lift the CA unit to clear it from the catches in the PF unit.
5.3.2. Installing the CA Unit
(1) Hold both ends of the CA unit and slide it in so that the alignment ribs on both sides
of the CA unit engage in the catch of the PF unit.
(2) Secure the CA unit to the PF unit by tightening the screws (2 pcs.).
(3) Fit the earth spring.