Service manual

REPAIR
Mechanical
SERVICE MANUAL
4-2
Many of the parts are held in place by plastic latches which may break if
mishandled. To remove such parts, press the hook end of the latch away from
the part to which it is latched.
1.1. Upper Cover
1.1.1. Removing the Upper Cover
(1) Turn off the power switch.
(2) Unplug the AC adaptor from the wall outlet, and unplug the adaptor from the
machine.
(3) Remove the paper support:
a) Push on the point indicated by the black arrow and disengage the hook from
the rib on the paper support.
b) Hold the middle of the support and carefully push on the point indicated by the
black arrow and disengage the hook from the upper cover.
c) Lift the paper support to remove it from the upper cover.