Owner's Manual

9. CLEANING

BAS-300G-484, BAS-300G-484 SF

9-3. Draining the oil

1. Remove and empty the waste oil tank (1) whenever it is

full.

2. After emptying the waste oil tank (1), screw it back into

its original position.

9-4. Checking the regulator

1. If water collects in the bottle of the regulator (1), close

the air cock (2), and then turn the drain cock (3) in the

direction of the arrow to drain the water.

2. After draining the water, tighten the drain cock (3).

3. Open the air cock (2).

9-5. Cleaning the eye guard

Wipe the eye guard clean with a soft cloth.

NOTE:

Do not use solvents such as kerosene or thinner to clean

the eye guard.

9-6. Checking the needle

Always check that the tip of the needle is not broken and

also that the needle is not bent before starting sewing.

9-7. Lubrication

Lubricate the sewing machine while referring to "3-15. Lubrication".

2550Q

2208B

4679M

Open

4678M