Copier User Manual
Table Of Contents
- Advanced User’s Guide MFC-8950DW/MFC-8950DWT
- User's Guides and where do I find them?
- Table of Contents
- 1 General Setup
- 2 Security features
- 3 Sending a fax
- Additional sending options
- Additional sending operations
- Sending a fax manually
- Sending a fax at the end of a conversation
- Dual access
- Broadcasting
- Real Time Transmission
- Overseas Mode
- Delayed Fax
- Delayed batch transmission
- Checking and canceling waiting jobs
- Setting your changes as the new default
- Restoring all fax settings to the factory settings
- Electronic cover page
- Destination Display
- Polling overview
- 4 Receiving a fax
- 5 Dialing and storing numbers
- 6 Printing reports
- 7 Making copies
- Copy settings
- Stop copying
- Improving copy quality
- Enlarging or reducing the image copied
- Duplex (2-sided) Copying
- Tray selection
- Adjusting Brightness and Contrast
- Sorting copies
- Making N in 1 copies (page layout)
- 2 in 1 ID Copy
- Setting your changes as the new default
- Restoring all copy settings to the factory settings
- Setting your favorites
- Copy settings
- A Routine maintenance
- B Options
- C Glossary
- Index
Making copies
55
7
a Press Copy.
b Load your document.
c Enter the number of copies you want.
d Press d or c to display Duplex Copy.
Press Duplex Copy.
e Press d or c to display the following
layout options:
2side2side,
1side2side LongEdgeFlip,
2side1side LongEdgeFlip,
1side2side ShortEdgeFlip,
2side1side ShortEdgeFlip,
Off
Press the option you want.
f If you do not want to change additional
settings, press Start.
Tray selection 7
You can change the Tray Use option for the
next copy.
a Press Copy.
b Load your document.
c Enter the number of copies you want.
d Press d or c to display Tray Use.
Press Tray Use.
e Press MP>T1, MP>T1>T2
1
, T1>MP,
T1>T2>MP
1
, Tray#1 Only,
Tray#2 Only
1
or MP Only.
1
T2 and Tray#2 Only appears only if Tray 2
is installed.
f If you do not want to change additional
settings, press Start.
Note
To change the default setting for Tray Use
uu Basic User's Guide: Tray Use in Copy
mode