Copier User Manual

Receiving a fax
31
4
Paging 4
When Paging is chosen, the machine dials
the cell phone or pager number you
programmed. This activates your cell phone
or pager so you will know that you have a fax
message in the machine’s memory.
a Press Menu.
b Press a or b to display Fax.
Press Fax.
c Press a or b to display
Setup Receive.
Press Setup Receive.
d Press a or b to display
Forward/Page/Store.
Press Forward/Page/Store.
e Press Paging.
f Enter your cell phone or pager number
followed by # # (up to 20 digits) by
pressing the buttons on the
Touchscreen.
Press OK.
Do not include the area code if it is the
same as that of your machine.
For example, press
18005551234##.
g Do one of the following:
 If your pager needs a PIN, enter the
PIN, press #, press Pause, enter
your fax number followed by ##.
Press OK. (For example, press:
1 2 3 4 5 # Pause 1 8 0 0 5 5 5 6 7
8 9 # #)
 If you do not need a PIN, press OK.
 If you are programming a cell phone
number, press OK.
h Press Stop/Exit.
Note
• If you have set Paging, a backup copy will
automatically be printed at the machine.
• You cannot change a pager, cell phone or
PIN number remotely.