Owner's Manual
Table Of Contents
- Quick Setup Guide FAX-1360
- Getting Started
- Setting Up the Machine
- 1 Removing the protective parts
- 2 Installing the Handset
- 3 Opening the document support and document tray
- 4 Loading paper
- 5 Connecting the phone line
- 6 Connecting the power cord
- 7 Installing the ink cartridge
- 8 Print quality check
- 9 Choosing your language (Canada only)
- 10 Setting the LCD contrast
- 11 Setting the date and time
- 12 Setting your station ID
- 13 Setting tone or pulse dialing mode
- 14 Choosing a Receive Mode
- 15 Sending in the Product Registration and Test Sheet (USA only)
- Consumables
- brother USA/CAN
Setting Up the Machine
6
2 Open the ink cartridge cover (1).
3 Pull the lock release lever down and remove
the yellow protective part (1).
Note
Do not throw away the yellow protective part. You
will need it if you transport the machine.
4 Take out the ink cartridge.
5 Carefully remove the protective yellow cap (1).
Improper Setup
DO NOT touch the area shown in the
illustration below.
Note
If the protective yellow cap comes off when you
open the bag, the cartridge will not be damaged.
1
1