Owner's Manual
Table Of Contents
- Quick Setup Guide FAX-1360
- Getting Started
- Setting Up the Machine
- 1 Removing the protective parts
- 2 Installing the Handset
- 3 Opening the document support and document tray
- 4 Loading paper
- 5 Connecting the phone line
- 6 Connecting the power cord
- 7 Installing the ink cartridge
- 8 Print quality check
- 9 Choosing your language (Canada only)
- 10 Setting the LCD contrast
- 11 Setting the date and time
- 12 Setting your station ID
- 13 Setting tone or pulse dialing mode
- 14 Choosing a Receive Mode
- 15 Sending in the Product Registration and Test Sheet (USA only)
- Consumables
- brother USA/CAN
Setting Up the Machine
3
1
1 Removing the protective
parts
1 Remove the protective tape.
2 Installing the Handset
1 Connect the curled handset cord to the
machine and the other end to the handset.
3 Opening the document
support and document tray
1 Open the document support ( ) and the
document tray ( ) and then pull out the
extension ( ).
4 Loading paper
You can load up to 100 sheets of 20 lb
(80 g/m
2
) paper.
For details, see Handling and using plain
paper in Chapter 2 of the User’s Guide.
1 Pull the paper tray completely out of the
machine. If the paper support flap (1) is open,
close it. Open the output paper tray cover (2).
2 Press and hold universal guide release
button (1) as you slide out the front of the paper
tray to match the paper size you are using.
1
2
3
1
2
1