Quick Start Manual
Table Of Contents
- YL4MFC_US.PDF
- Front Cover
- Inside Front Cover
- Brother Numbers
- Ordering Accessories and Supplies
- Quick Reference Guide
- How to Access the Complete Owner's Manual (For MFC-4800 Only)
- How to Access Brother Support (For MFC-4800 Only) (For Windows® Only)
- Download the Printer Driver from the Brother Web Site (For FAX-2900 and FAX-3800 Only)
- Table of Contents
- 1.Introduction
- 2.Assembly and Connections
- Packing List
- Choosing a Location
- Assembly
- Installing the Drum Unit Assembly (with Toner Cartridge)
- Setting Up the FAX/MFC
- Loading Paper
- Acceptable Paper
- Paper Capacity of Multi-purpose Sheet Feeder
- Connecting an External Telephone
- Connecting an External Telephone Answering Device (TAD)
- Special Line Considerations
- Multi-Line Connections (PBX)
- Custom Features on Your Phone Line
- 3.On-Screen Programming
- 4.Initial Setup
- Getting Started
- Setting the Paper Size
- Setting the Date and Time
- Setting the Station ID
- Setting the Ring Volume
- Setting the Beeper Volume
- Setting the Speaker Volume
- Setting the Handset Volume
- Choosing the Handset Volume (For Volume Amplify)
- Setting Volume Amplify
- Memory Storage
- Turning On Automatic Daylight Savings Time
- Toner Save
- Sleep Mode
- Setting Tone/Pulse Dialing Mode (For Canada Only)
- Getting Started
- 5.Setup Receive
- 6.Setup Send
- 7.Auto Dial Numbers and Dialing Options
- 8.Telephone Services
- 9.Remote Fax Options
- 10.Printing Reports
- 11.Making Copies
- 12.Important Information
- 13.Troubleshooting and Routine Maintenance
- Glossary
- Specifications
- Index
- Remote Retrieval Access Card
- Rear Cover
7 - 5
AUTO DIAL NUMBERS AND DIALING OPTIONS
Speed Dialing
1
Pick up the handset—OR— Press Hook.
2
When you hear a dial tone.
For FAX-2800 and MFC-4800, press Search/Speed Dial, press #, and then
press the two-digit Speed Dial location.
For FAX-2900 and FAX-3800, press Search/Speed Dial, press #, and then
the three-digit location.
(See
Storing Speed Dial Numbers, page 7-2.)
3
If you pressed Hook to dial the call, pick up the handset when the other party
answers. (The speaker works only one way; the other party won’t be able to hear
you unless you pick up the handset.)
4
To hang up, replace the handset.
One Touch Dialing (For FAX Models Only)
1
Pick up the handset—OR— Press Hook.
2
When you hear a dial tone, press the One Touch key of the location you will
want to call.
(See
Storing One Touch Dial Numbers (For FAX Models Only), page 7-1.)
3
If you pressed Hook to dial the call, pick up the handset when the other party
answers. (The speaker works only one way; the other party won’t be able to hear
you unless you pick up the handset.)
4
To hang up, replace the handset.
Note
If you are sending a fax, press Fax Start after entering the Speed Dial number.
If you picked up the handset, press Fax Start when the receiving fax machine
answers with fax tones.
If you try to use a One Touch location with no number stored in it, you will hear
a warning sound, and the LCD will show NOT REGISTERED for 2 seconds.
Note
If you are sending a fax, press Fax Start after pressing the One Touch key. If
you picked up the handset, press Fax Start when the receiving fax machine
answers with fax tones.