Quick Start Manual
Table Of Contents
- YL4MFC_US.PDF
- Front Cover
- Inside Front Cover
- Brother Numbers
- Ordering Accessories and Supplies
- Quick Reference Guide
- How to Access the Complete Owner's Manual (For MFC-4800 Only)
- How to Access Brother Support (For MFC-4800 Only) (For Windows® Only)
- Download the Printer Driver from the Brother Web Site (For FAX-2900 and FAX-3800 Only)
- Table of Contents
- 1.Introduction
- 2.Assembly and Connections
- Packing List
- Choosing a Location
- Assembly
- Installing the Drum Unit Assembly (with Toner Cartridge)
- Setting Up the FAX/MFC
- Loading Paper
- Acceptable Paper
- Paper Capacity of Multi-purpose Sheet Feeder
- Connecting an External Telephone
- Connecting an External Telephone Answering Device (TAD)
- Special Line Considerations
- Multi-Line Connections (PBX)
- Custom Features on Your Phone Line
- 3.On-Screen Programming
- 4.Initial Setup
- Getting Started
- Setting the Paper Size
- Setting the Date and Time
- Setting the Station ID
- Setting the Ring Volume
- Setting the Beeper Volume
- Setting the Speaker Volume
- Setting the Handset Volume
- Choosing the Handset Volume (For Volume Amplify)
- Setting Volume Amplify
- Memory Storage
- Turning On Automatic Daylight Savings Time
- Toner Save
- Sleep Mode
- Setting Tone/Pulse Dialing Mode (For Canada Only)
- Getting Started
- 5.Setup Receive
- 6.Setup Send
- 7.Auto Dial Numbers and Dialing Options
- 8.Telephone Services
- 9.Remote Fax Options
- 10.Printing Reports
- 11.Making Copies
- 12.Important Information
- 13.Troubleshooting and Routine Maintenance
- Glossary
- Specifications
- Index
- Remote Retrieval Access Card
- Rear Cover
SETUP SEND
6 - 10
Delayed Batch Transmission
Before sending the delayed faxes, your FAX/MFC will economize by sorting all
the documents in memory by destination and scheduled time. All delayed faxes
scheduled at the same time to the same fax number will be sent as one
transmission.
1
Press Menu/Set, 2, 2, 5.
2
Press to select ON (or OFF),
and then press Menu/Set.
3
Press Stop/Exit.
Setting Up Polled Transmit
Polled Transmit is when you set up your FAX/MFC to wait with a document so
another fax machine can retrieve it.
1
Place the original to be retrieved face down in the ADF.
2
Press Menu/Set, 2, 2, 7.
3
Press to choose ON (or OFF),
and then press Menu/Set.
4
Press 1 to leave the original waiting in
the ADF—OR—Press 2 to scan the
original into memory.
5
If you want to select additional settings, press 1. The LCD returns to the SETUP
SEND menu—OR—Press 2 if you are finished choosing settings.
6
Press Fax Start.
Note
If you pressed 1 in Step 4, the printed document remains in the ADF until your
FAX/MFC is polled. If you must use your FAX/MFC before the polled transmit
occurs, you must cancel this job.
5.BATCH TX
or
7.POLLED TX
or
1.DOC 2.MEMORY