Quick Start Manual
Table Of Contents
- YL4MFC_US.PDF
- Front Cover
- Inside Front Cover
- Brother Numbers
- Ordering Accessories and Supplies
- Quick Reference Guide
- How to Access the Complete Owner's Manual (For MFC-4800 Only)
- How to Access Brother Support (For MFC-4800 Only) (For Windows® Only)
- Download the Printer Driver from the Brother Web Site (For FAX-2900 and FAX-3800 Only)
- Table of Contents
- 1.Introduction
- 2.Assembly and Connections
- Packing List
- Choosing a Location
- Assembly
- Installing the Drum Unit Assembly (with Toner Cartridge)
- Setting Up the FAX/MFC
- Loading Paper
- Acceptable Paper
- Paper Capacity of Multi-purpose Sheet Feeder
- Connecting an External Telephone
- Connecting an External Telephone Answering Device (TAD)
- Special Line Considerations
- Multi-Line Connections (PBX)
- Custom Features on Your Phone Line
- 3.On-Screen Programming
- 4.Initial Setup
- Getting Started
- Setting the Paper Size
- Setting the Date and Time
- Setting the Station ID
- Setting the Ring Volume
- Setting the Beeper Volume
- Setting the Speaker Volume
- Setting the Handset Volume
- Choosing the Handset Volume (For Volume Amplify)
- Setting Volume Amplify
- Memory Storage
- Turning On Automatic Daylight Savings Time
- Toner Save
- Sleep Mode
- Setting Tone/Pulse Dialing Mode (For Canada Only)
- Getting Started
- 5.Setup Receive
- 6.Setup Send
- 7.Auto Dial Numbers and Dialing Options
- 8.Telephone Services
- 9.Remote Fax Options
- 10.Printing Reports
- 11.Making Copies
- 12.Important Information
- 13.Troubleshooting and Routine Maintenance
- Glossary
- Specifications
- Index
- Remote Retrieval Access Card
- Rear Cover
5 - 2
SETUP RECEIVE
To Select or Change Your Receive Mode
1
Press Receive Mode. The LCD shows your active setting.
2
Continue to press Receive Mode until your new selection appears. After two
seconds, the LCD returns to the date and time and shows the new Receive Mode.
Setting the Ring Delay
The Ring Delay setting determines the number of times the FAX/MFC rings
before it answers. If you have extension phones on the same line as the FAX/
MFC, keep the Ring Delay default setting of 04. (See
Easy Receive, page 5-3 and
Operation from Extension Telephones and For FAX/TEL Mode Only, page 5-5.)
1
Press Menu/Set, 2, 1, 1.
2
Press to select how many times the
line rings before the FAX/MFC answers (00–04), and then press Menu/Set.
If you select 00, the line doesn’t ring at all.
3
Press Stop/Exit.
If you are changing the Receive Mode while in another operation, the LCD
returns to that operation.
FAX/TEL
FAX ONLY
TAD:ANSWER MACH.
MANUAL
09/06 15:25 FAX
Current Receive Mode
1.RING DELAY
or