Quick Start Manual
Table Of Contents
- YL4MFC_US.PDF
- Front Cover
- Inside Front Cover
- Brother Numbers
- Ordering Accessories and Supplies
- Quick Reference Guide
- How to Access the Complete Owner's Manual (For MFC-4800 Only)
- How to Access Brother Support (For MFC-4800 Only) (For Windows® Only)
- Download the Printer Driver from the Brother Web Site (For FAX-2900 and FAX-3800 Only)
- Table of Contents
- 1.Introduction
- 2.Assembly and Connections
- Packing List
- Choosing a Location
- Assembly
- Installing the Drum Unit Assembly (with Toner Cartridge)
- Setting Up the FAX/MFC
- Loading Paper
- Acceptable Paper
- Paper Capacity of Multi-purpose Sheet Feeder
- Connecting an External Telephone
- Connecting an External Telephone Answering Device (TAD)
- Special Line Considerations
- Multi-Line Connections (PBX)
- Custom Features on Your Phone Line
- 3.On-Screen Programming
- 4.Initial Setup
- Getting Started
- Setting the Paper Size
- Setting the Date and Time
- Setting the Station ID
- Setting the Ring Volume
- Setting the Beeper Volume
- Setting the Speaker Volume
- Setting the Handset Volume
- Choosing the Handset Volume (For Volume Amplify)
- Setting Volume Amplify
- Memory Storage
- Turning On Automatic Daylight Savings Time
- Toner Save
- Sleep Mode
- Setting Tone/Pulse Dialing Mode (For Canada Only)
- Getting Started
- 5.Setup Receive
- 6.Setup Send
- 7.Auto Dial Numbers and Dialing Options
- 8.Telephone Services
- 9.Remote Fax Options
- 10.Printing Reports
- 11.Making Copies
- 12.Important Information
- 13.Troubleshooting and Routine Maintenance
- Glossary
- Specifications
- Index
- Remote Retrieval Access Card
- Rear Cover
INITIAL SETUP
4 - 4
Setting the Ring Volume
1
Press Menu/Set, 1, 4, 1.
2
Press to select OFF, LOW, MED or HIGH, and then press Menu/Set.
3
Press Stop/Exit.
—OR—
You can adjust the ring volume when your FAX/MFC is idle. You can turn the
ring OFF or you can select a ring volume level.
Press
to adjust the volume level. With each key press, the FAX/MFC rings
so you can hear the active setting as the LCD shows it.
Each key press changes the volume. The new setting will remain until you
change it again.
Setting the Beeper Volume
You can set the beeper to LOW, HIGH or OFF. The default setting is LOW.
When the beeper is set to LOW or HIGH, the FAX/MFC beeps every time you
press a key or make an error and when fax sending or receiving has finished.
1
Press Menu/Set, 1, 4, 2.
2
Press to select OFF, LOW or HIGH, and then press Menu/Set.
3
Press Stop/Exit.
Setting the Speaker Volume
1
Press Menu/Set, 1, 4, 3.
2
Press to select LOW, MED, HIGH or OFF, and then press Menu/Set.
3
Press Stop/Exit.
—OR—
If you are using Hook, you can adjust the speaker volume while dialing. You
can turn the speaker off or you can select a speaker volume level. The default
setting is the lowest volume.
Press
to adjust the volume level. With each key press, the volume changes
as the LCD shows the active setting. The new setting will remain until you
change it again.
1.RING
or
or
2.BEEPER
or
3.SPEAKER
or
or