Quick Start Manual
Table Of Contents
- YL4MFC_US.PDF
- Front Cover
- Inside Front Cover
- Brother Numbers
- Ordering Accessories and Supplies
- Quick Reference Guide
- How to Access the Complete Owner's Manual (For MFC-4800 Only)
- How to Access Brother Support (For MFC-4800 Only) (For Windows® Only)
- Download the Printer Driver from the Brother Web Site (For FAX-2900 and FAX-3800 Only)
- Table of Contents
- 1.Introduction
- 2.Assembly and Connections
- Packing List
- Choosing a Location
- Assembly
- Installing the Drum Unit Assembly (with Toner Cartridge)
- Setting Up the FAX/MFC
- Loading Paper
- Acceptable Paper
- Paper Capacity of Multi-purpose Sheet Feeder
- Connecting an External Telephone
- Connecting an External Telephone Answering Device (TAD)
- Special Line Considerations
- Multi-Line Connections (PBX)
- Custom Features on Your Phone Line
- 3.On-Screen Programming
- 4.Initial Setup
- Getting Started
- Setting the Paper Size
- Setting the Date and Time
- Setting the Station ID
- Setting the Ring Volume
- Setting the Beeper Volume
- Setting the Speaker Volume
- Setting the Handset Volume
- Choosing the Handset Volume (For Volume Amplify)
- Setting Volume Amplify
- Memory Storage
- Turning On Automatic Daylight Savings Time
- Toner Save
- Sleep Mode
- Setting Tone/Pulse Dialing Mode (For Canada Only)
- Getting Started
- 5.Setup Receive
- 6.Setup Send
- 7.Auto Dial Numbers and Dialing Options
- 8.Telephone Services
- 9.Remote Fax Options
- 10.Printing Reports
- 11.Making Copies
- 12.Important Information
- 13.Troubleshooting and Routine Maintenance
- Glossary
- Specifications
- Index
- Remote Retrieval Access Card
- Rear Cover
TROUBLESHOOTING AND ROUTINE MAINTENANCE
13 - 11
DIFFICULTY SUGGESTIONS
Windows
®
Setup Printing Difficulties
I cannot print from my
application software.
Make sure the Windows
®
printer driver is installed
and that you selected it in your application
software.
Sometimes I get the
error message OUT OF
MEMORY when
printing certain
documents from
Windows
®
.
If you are using the supplied Windows
®
driver, turn
the error recover operation on in the Setup dialog
box and try again. Reduce the print resolution or
reduce the complexity of your document and try
again.
The MFC does not load
paper. The LCD shows
CHECK PAPER or
PAPER JAM.
Check to see if the CHECK PAPER or PAPER
JAM message appears on the LCD. If so, the multi-
purpose sheet feeder may be out of paper or not
properly installed. If it is empty, load a new stack
of paper into the feeder and then press Fax Start.
If there is paper in the multi-purpose sheet feeder,
make sure it is straight. If the paper is curled, you
should straighten it. Sometimes it is helpful to
remove the paper, turn the stack over and place it
back into the multi-purpose sheet feeder. Reduce
the amount of paper in the multi-purpose sheet
feeder, and then try again.
How can I load
envelopes?
You can load envelopes from the multi-purpose
sheet feeder. Your application software must be set
up to print the envelope size you are using. This is
usually done in the Page Setup or Document Setup
menu of your software. Refer to your application
manual.
What paper can I use? You can use plain paper, envelopes, organizer
paper, transparencies and labels for laser
machines. For information on paper you can use,
See
Acceptable Paper on page 2-7.
How can I clear paper
jams?
See
Paper Jam on page 13-5 to 13-6.