Quick Start Manual

4
Windows
®
USB
5
Connect the USB cable
a Connect the USB cable to the USB port
marked with a symbol on your machine.
Connect the cable to your computer.
b The installation will continue automatically.
Multiple screens will appear during the
installation.
c When the On-Line Registration screen is
displayed, make your selection and follow the
on-screen instructions.
6
Finish and restart
a Click Finish to restart your computer.
After restarting the computer, you must log on
with Administrator rights.
b The following screens will appear.
• When the Software Update Setting screen
appears, choose the software update setting
you want and click OK.
• When the Brother Product Research &
Support Program starts up, follow the
on-screen instructions.
Now go to
Proceed to Install Optional Applications on
page 7.
Important
DO NOT cancel any of the screens during the
installation. It may take a few seconds for all
screens to appear.
Note
If an error message appears during the software
installation, run the Installation Diagnostics
located in (Start)/All Programs/Brother/
ADS-2000.
Note
Internet access is required for the software
update and the Brother Product Research &
Support Program.
Finish
The installation is now
complete.