Service manual

3-35
Confidential
9.16 Wireless LAN PCB (Wireless network model only)
(1) Disconnect the wireless LAN PCB from the main PCB ASSY.
(2) Remove the gasket from the wireless LAN PCB.
Fig. 3-33
Fig. 3-34
Assembling Note:
• When connecting the wireless LAN PCB, insert the wireless LAN PCB to the hole on
the machine, and connect the wireless LAN PCB to the main PCB ASSY.
• Attach the gasket to the location shown in the figure below.
Wireless LAN PCB
Gasket
Wireless LAN PCB
<HL-L2305W/L2340DW>
Wireless LAN PCB
Hole
Gasket
Hole
<WLAN models other than HL-2305W/2340DW>
<Back side>
<Back side>
Wireless LAN PCB
Main PCB ASSY
Main PCB ASSY
Gasket
Wireless LAN PCB