Operation Manual

Home > Network > Additional Methods of Configuring Your Brother Machine for a Wireless Network > Use

Wi-Fi Direct

> Configure Your Wi-Fi Direct Network > Configure Your Wi-Fi Direct Network Using the PIN

Method of Wi-Fi Protected Setup

™

(WPS)

Configure Your Wi-Fi Direct Network Using the PIN Method of Wi-Fi

Protected Setup

™

(WPS)

Related Models: HL-L2350DW/HL-L2357DW/HL-L2375DW

If your mobile device supports the PIN Method of Wi-Fi Protected Setup

™

(WPS), follow these steps to configure

a Wi-Fi Direct network:

1. Press a or b to select the [Network] option, and then press OK.

2. Press a or b to select the [Wi-Fi Direct] option, and then press OK.

3. Press a or b to select the [Group Owner] option, and then press OK.

4. Press a or b to select the [On] option, and then press OK.

5. Press a or b to select the [PIN Code] option, and then press OK.

6. When [Wi-Fi Direct On?] appears, press b to accept. To cancel, press a.

7. Activate your mobile device's WPS PIN configuration method (see your mobile device's user's guide for

instructions) when [Activate Wi-Fi Direct on other device and press OK.] appears on the

machine's LCD. Press OK on your machine.

This will start the Wi-Fi Direct setup. To cancel, press Back.

8. The machine will wait for a connection request from your mobile device. When [Input PIN Code]

appears, enter the PIN displayed on your mobile device in the machine.

9. Press OK.

10. If your mobile device connects successfully, the machine's LCD displays [Connected]. You have completed

the Wi-Fi Direct network setup. The Mobile Print/Scan Guide for Brother iPrint&Scan contains information on

printing from your mobile device. Go to your model's Manuals page on the Brother Solutions Center at

support.brother.com to see the guide.

Related Information

• Configure Your Wi-Fi Direct Network