Quick Reference Guide

22
n Gently close the top cover using the finger holds on
each side.
o Pull Tray #2 completely out of the machine as
shown by the arrow.
p Remove the Fabric Roll from Tray #2 and roll up
the fabric.
If the feeding edge is folded, bent, or cut at an angle, cut it
straight across.
q Reload the Fabric Roll into Tray #2.
For details on loading, refer to “Load the Fabric Roll in
Tray #2” (P.8).
r Close the upper Jam Clear Cover A at the back of
the machine. Make sure the cover is closed
completely.
s Put the paper support firmly back in the machine.
Make sure you fit the paper support into the
channels.
t Slowly push the paper trays completely into the
machine.
u Reconnect the power cord.