Quick Reference Guide

12
About the Print settings screen
The Artspira Print settings menu differs based on the
project you choose.
Print quality
Select the printing resolution. Since there is a correlation
between print quality and print speed, increasing the
quality reduces the print speed.
Registration mark for cut
Adds a Registration mark to cutting data.
Positioning mark for embroidery
Adds a positioning mark to embroidery data. When
switched on, a menu appears so that the shape and color
of the positioning marks can be selected.
Print line for direct cut
Select whether or not to print an outline for using the
cutting machine's “Direct Cut” mode.
Shrinkage Allowance
Select this setting to print the pattern enlarged to account
for fabric shrinkage after washing.
Switch on if the fabric will be washed after printing. When
switched on, the pattern will be printed enlarged by about
3%.
Follow the instructions below when hand washing the fabric
after printing.
• Soak and hand wash the fabric for about 10 minutes with
enough water to submerge it.
• Carefully drain off the water, and then lay it flat to air-dry.
Wringing the fabric to remove excess water may cause
wrinkles or distort the printed pattern.
• Use an iron set between low and medium temperature to
smooth out wrinkles.
Borderless
Select this setting to print without borders.
Print data other than templates
Follow the instructions below to create original print
data with patterns other than the provided templates.
a Tap at the bottom of the Home screen.
b Tap [Printing].
c Select [Printing Patterns] or [Geometric Patterns],
and then create the pattern.
a Printing Patterns
Edit provided pattern data or use a photo from your
device to create and print original print data. After
editing is finished, tap [Done] to print.
b Geometric Patterns
Edit provided pattern data or a photo from your
device to create a pattern with a kaleidoscope
effect.
To save the data, tap [Save]. Saved data can be retrieved
with .
 When using as patterned fabric
CAUTION
If you experience skin irritation, itchiness or rashes due to
the fabric coming into direct contact with the skin,
discontinue use immediately.
Note the following when using printed fabric with a sewing
machine or cutting machine, or when washing it.
 If the fabric causes discoloration to the sewing
machine or cutting machine, remove the
discoloration according to the cleaning
instructions in the User’s Guide or Product Safety
Guide of the machine.
 Color will transfer and change during fabric use
and washing. Staining of the skin and other
materials may occur.
 Do not place in direct sunlight. All fabric will fade
in direct sunlight.
a
b