User`s guide

Wireless Configuration for Macintosh using the Brother installer application (For HL-3070CW)

Configure the wireless settings 5

a Make sure that the power cord is plugged in.

b Turn on the machine and wait until the machine is in the Ready state.

c Press any of the Menu buttons (+, -, OK or Back) of the control panel on your machine.

Press + or - to choose Network, press OK.

Press + or - to choose WLAN, press OK.

Press + or - to choose WLAN Enable, press OK.

Choose On.

d Turn on your Macintosh.

e Put the supplied CD-ROM into your CD-ROM drive. Double-click the HL3000 icon on your desktop.

Double-click the Start Here icon. Choose your printer model and the language.

f Click Install Printer Driver on the menu screen.

g Click Wireless Network users.