User`s guide

Wireless configuration for Windows

using the Brother automatic installer application (For HL-3070CW)

i Confirm the on-screen message and click Next.

j Press any of the Menu buttons (+, -, OK or Back) of the control panel on your machine.

k Press + or - to choose Network.

Press OK.

l Press + or - to choose WLAN.

Press OK.

m Press + or - to choose SES/WPS/AOSS.

Press OK.

Note

If your wireless access point supports Wi-Fi Protected Setup (PIN Method) and you want to configure your

machine using the PIN (Personal Identification Number) Method, see Wireless configuration using the PIN

Method of Wi-Fi Protected Setup (For HL-3070CW) in Chapter 7.

n The machine will search for an access point that supports SecureEasySetup™, Wi-Fi Protected Setup

or AOSS™ for 2 minutes.

o Put your access point in the SecureEasySetup™ mode, the Wi-Fi Protected Setup mode or the AOSS™

mode, depending on what is supported by your access point. Please refer to the instruction manual that

came with your access point.