User`s guide

2-13
Where servername is the name of the file server and alias is the alias name that you
specified during this configuration process. This should print the CONFIG.SYS file on
the printer. Note that if you selected a binary service as the LPD printer name, the lines
will be staggered; don't worry about this because normal DOS, Windows, and OS/2
applications will print OK.
5. The Brother Print Server will appear as a standard OS/2 printer to application
programs. To make the print server operate transparently with DOS programs, execute
the following command on each workstation:
NET USE LPT1: \\servername\alias
This will make the printer appear to the software as a printer that is directly connected
to the parallel port of the workstation.