User`s guide

1-7
Other Non-Standard Configurations
DEC TCP/IP Servers for VMS(UCX)
You need to run the sys$system:ucx:$lprsetup command, specify a printer name,
and then enter the print server IP address as the remote system name. Specify one of the print
server services (see beginning of this section for options) as the remote system printer name
(accept the defaults for other questions).
TGV’s Multinet
TGV's Multinet requires you to run the MULTINET CONFIGURE /PRINTERS command,
then use the ADD command to add a printer, specifying the print server IP address, a protocol
type of LPD, and one of the service options described at the beginning of this section as the
remote print queue.
Wollongong’s PATHWAY
First make sure that you have the Access option with lpd enabled. Then enter the print server
name and IP address in the TWG$TCP:[NETDIST.ETC]HOSTS file, run the LPGEN
program, and execute the command: add
queue/rmachine=prnservername/rprinter=prnserverservice, where queue is the name of the
queue, prnservername is the print server name from the hosts file, and prnserverservice is the
print server service name.