User Manual
Table Of Contents
- Product Safety Guide
- Symbols and conventions used in the documentation
- Compilation and Publication
- Choosing a location
- To use the product safely
- Regulation
- Standard telephone and FCC notices (MFC only)
- Federal Communications Commission (FCC) Declaration of Conformity (USA only)
- Industry Canada Compliance Statement (Canada only)
- EQUIPMENT ATTACHMENT LIMITATIONS (Canada only) (MFC only)
- Laser safety (For 110-120V Models Only)
- FDA regulations (For 110-120V Models Only)
- For use in the USA or Canada only
- LAN connection (Network models only)
- International ENERGY STAR® Qualification Statement
- Trademarks
- Open Source Licensing Remarks
- Copyright and License
- Other Information
- Legal limitations for copying (MFC and DCP only)
8
DO NOT inhale the toner powder. If toner powder is inhaled, please follow these steps
immediately:
• Move to an area with plenty of fresh air.
• Gargle and rinse your mouth out with plenty of water.
• If you develop a cough or any other symptoms soon after inhaling the toner, consult your
doctor immediately.
If toner powder is swallowed, rinse your mouth immediately and drink plenty of fresh water to
dilute the toner. Then consult your doctor immediately thereafter. For more safety information
regarding the toners used in your product, please visit the following web address to read the
Safety Data Sheets http://sds.brother.co.jp/sdsapp/index.html
, which include important
information about the chemical composition of the toners and the precautions to take in case of
overexposure to toner.
HOT SURFACE
After you have just used the product, some internal parts of the product will be extremely hot.
Wait at least 10 minutes for the product to cool down before you touch the internal parts of the
product.
(MFC and DCP only)
When moving the product, grasp the side handholds firmly from the front of the product. The
side handholds are located under the scanner. DO NOT carry the product by holding it at the
bottom.