SSL Guide
Table Of Contents
- SSL Guide
- Applicable models
- Definitions of notes
- Trademarks
- IMPORTANT NOTE
- Table of Contents
- 1 Introduction
- 2 Digital Certificate for SSL communication
- Digital Certificate Installation
- Creating a self-signed certificate
- Creating a Certificate Signing Request (CSR)
- How to install the certificate to your machine
- Choosing the certificate
- Installing the self-signed certificate or pre-installed certificate onto Windows Vista®, Windows® 7 and Windows Server® 2008 for users with administrator rights
- Installing the self-signed certificate or pre-installed certificate for Windows® XP and Windows Server® 2003 users
- Import and export the certificate and private key
- Managing multiple certificates
- Digital Certificate Installation
- 3 Managing your network machine securely using SSL/TLS
- 4 Printing documents securely using SSL
- 5 Sending or Receiving (for DCP and MFC models) an E-mail securely
- 6 Troubleshooting
30
Troubleshooting
6
For DCP-8110DN, DCP-8150DN, DCP-8155DN, MFC-8510DN, MFC-8710DW, MFC-8810DW and
MFC-8910DW 6
a Press Menu.
b (For MFC models) Press a or b to choose Print Reports.
(For DCP models) Press a or b to choose Machine Info..
Press OK.
c Press a or b to choose Network Config.
Press OK.
d Press Start.
For DCP-8250DN and MFC-8950DW(T) 6
a Press Menu.
b Press a or b to display Print Reports and then press Print Reports.
c Press Network Confi g.
d Press Start.
Note
If the IP Address on the Network Configuration Report shows 0.0.0.0, wait for one minute and try again.