SSL Guide
Table Of Contents
- SSL Guide
- Applicable models
- Definitions of notes
- Trademarks
- IMPORTANT NOTE
- Table of Contents
- 1 Introduction
- 2 Digital Certificate for SSL communication
- Digital Certificate Installation
- Creating a self-signed certificate
- Creating a Certificate Signing Request (CSR)
- How to install the certificate to your machine
- Choosing the certificate
- Installing the self-signed certificate or pre-installed certificate onto Windows Vista®, Windows® 7 and Windows Server® 2008 for users with administrator rights
- Installing the self-signed certificate or pre-installed certificate for Windows® XP and Windows Server® 2003 users
- Import and export the certificate and private key
- Managing multiple certificates
- Digital Certificate Installation
- 3 Managing your network machine securely using SSL/TLS
- 4 Printing documents securely using SSL
- 5 Sending or Receiving (for DCP and MFC models) an E-mail securely
- 6 Troubleshooting
28
Troubleshooting
6
I cannot print the document over the internet using IPPS.
Question Solution
I cannot communicate with my
Brother machine using SSL.
Obtain valid certificate and install on both your machine and computer again.
Make sure the port setting of your machine is correct. You can confirm your
machine’s port setting on the Web Based Management screen, by clicking
Network, Protocol and then HTTP Server Settings.
I want to check my network devices are working properly.
Question Solution
Is your Brother machine
turned on?
Make sure you have confirmed all instructions in First check the following:
uu page 27.
Where can I find my Brother
machine's network settings,
such as IP address?
Print the Network Configuration Report. See Printing the Printer Settings Page (For
HL-5450DN(T)) uu page 29 or Printing the Network Configuration Report (For
other models) uu page 29.