SSL Guide
Table Of Contents
- SSL Guide
- Applicable models
- Definitions of notes
- Trademarks
- IMPORTANT NOTE
- Table of Contents
- 1 Introduction
- 2 Digital Certificate for SSL communication
- Digital Certificate Installation
- Creating a self-signed certificate
- Creating a Certificate Signing Request (CSR)
- How to install the certificate to your machine
- Choosing the certificate
- Installing the self-signed certificate or pre-installed certificate onto Windows Vista®, Windows® 7 and Windows Server® 2008 for users with administrator rights
- Installing the self-signed certificate or pre-installed certificate for Windows® XP and Windows Server® 2003 users
- Import and export the certificate and private key
- Managing multiple certificates
- Digital Certificate Installation
- 3 Managing your network machine securely using SSL/TLS
- 4 Printing documents securely using SSL
- 5 Sending or Receiving (for DCP and MFC models) an E-mail securely
- 6 Troubleshooting
25
5
5
Configuration using Web Based Management (web browser) 5
You can configure secured E-mail sending with user authentication or E-mail sending and receiving (for DCP
and MFC models) using SSL/TLS on the Web Based Management screen.
a Start your web browser.
b Type “http://machine’s IP address/” into your browser (where “machine’s IP address” is the machine’s IP
address).
For example:
http://192.168.1.2/
c No password is required by default. Enter a password if you have set one and press .
d Click Network.
e Click Protocol.
f Click Advanced Setting of POP3/SMTP and make sure that the status of POP3/SMTP is Enabled.
g You can configure the POP3/SMTP settings on this page.
Note
• For more information, see the Help text in Web Based Management.
• You can also confirm whether the E-mail settings are correct after configuration by sending a test E-mail.
• If you do not know the POP3/SMTP server settings, please contact your system administrator or ISP
(Internet Service Provider) for details.
h After configuring, click Submit. The Test E-mail Send Configuration or
Test E-mail Send/Receive Configuration screen appears.
i Follow the instructions on-screen if you want to test with the current settings.
Sending or Receiving (for DCP and MFC
models) an E-mail securely
5