SSL Guide
Table Of Contents
- SSL Guide
- Applicable models
- Definitions of notes
- Trademarks
- IMPORTANT NOTE
- Table of Contents
- 1 Introduction
- 2 Digital Certificate for SSL communication
- Digital Certificate Installation
- Creating a self-signed certificate
- Creating a Certificate Signing Request (CSR)
- How to install the certificate to your machine
- Choosing the certificate
- Installing the self-signed certificate or pre-installed certificate onto Windows Vista®, Windows® 7 and Windows Server® 2008 for users with administrator rights
- Installing the self-signed certificate or pre-installed certificate for Windows® XP and Windows Server® 2003 users
- Import and export the certificate and private key
- Managing multiple certificates
- Digital Certificate Installation
- 3 Managing your network machine securely using SSL/TLS
- 4 Printing documents securely using SSL
- 5 Sending or Receiving (for DCP and MFC models) an E-mail securely
- 6 Troubleshooting
17
Digital Certificate for SSL communication
2
Import and export the certificate and private key 2
You can store the certificate and private key on the machine and manage them by importing and exporting.
How to import the self-signed certificate, the certificate issued by a CA, and the
private key 2
a Click Import Certificate and Private Key on the Certificate page.
b Specify the file that you want to import.
c Enter the password if the file is encrypted, and then click Submit.
d Now the certificate and private key are imported to your machine successfully.
How to export the self-signed certificate, the certificate issued by a CA, and the
private key 2
a Click Export shown with Certificate List on the Certificate page.
b Enter a password if you want to encrypt the file.
Note
If a blank password is used, the output is not encrypted.
c Enter the password again for confirmation, and then click Submit.
d Specify the location where you want to save the file.
e Now the certificate and private key are exported to your computer.