User's Guide
Table Of Contents
- User’s Guide HL-5470DW/HL-5470DWT/HL-6180DW/HL-6180DWT
- User's Guides and where to find them?
- Using the documentation
- Table of Contents
- 1 Printing Methods
- 2 Driver and Software
- Printer driver
- Windows®
- Macintosh
- Software
- 3 General Information
- 4 Options
- 5 Routine Maintenance
- 6 Troubleshooting
- A Appendix
- Index
87
General Information
3
WLAN TCP/IP Boot Method Auto* / Static / RARP /
BOOTP / DHCP
Chooses the IP method that best
suits your needs.
IP Address ###.###.###.###
(000.000.000.000)*
1
Enter the IP address.
Subnet Mask ###.###.###.###
(000.000.000.000)*
1
Enter the Subnet mask.
Gateway ###.###.###.###
(000.000.000.000)*
1
Enter the Gateway address.
IP Boot Tries 0 / 1 / 2 / 3* / ... / 32767 Specifies the number of
attempts the machine will try to
obtain an IP address when the
Boot Method is set to any
setting except Static.
APIPA On* / Off Automatically allocates the IP
address from the link-local
address range.
1
IPv6 On / Off* Enables or Disables the IPv6
protocol.
Setup Wizard
- - Configures the wireless network
settings using the setup wizard.
WPS/AOSS - - Configures the wireless network
settings using WPS or AOSS™
method.
WPS w/PIN Code
- - Configures the wireless network
settings using WPS with a PIN
code.
Network Menu (continued)
Submenu 1 Submenu 2 Menu Selections Options Descriptions
The factory settings are shown in Bold with an asterisk.