User's Guide

86
General Information
3
Network Menu
Submenu 1 Submenu 2 Menu Selections Options Descriptions
Wired LAN TCP/IP Boot Method Auto* / Static / RARP /
BOOTP / DHCP
Chooses the IP method that best
suits your needs.
IP Address ###.###.###.###
(000.000.000.000)*
1
Enter the IP address.
Subnet Mask ###.###.###.###
(000.000.000.000)*
1
Enter the Subnet mask.
Gateway ###.###.###.###
(000.000.000.000)*
1
Enter the Gateway address.
IP Boot Tries 0 / 1 / 2 / 3* / ... / 32767 Specifies the number of
attempts the machine will try to
obtain an IP address when the
Boot Method is set to any
setting except Static.
APIPA On* / Off Automatically allocates the IP
address from the link-local
address range.
1
IPv6 On / Off* Sets use of IPv6 protocol.
Ethernet - Auto* / 100B-FD /
100B-HD / 10B-FD /
10B-HD
Chooses Ethernet link mode.
Wired Status -
Active 1000B-FD
2
/
Active 100B-FD /
Active 100B-HD /
Active 10B-FD /
Active 10B-HD /
Inactive / Wired OFF
Shows Ethernet link status.
MAC Address - - Shows MAC address of the
machine.
Set to Default Restores wired network settings of the internal print server to the factory default.
Wired Enable - On* / Off Chooses Ethernet link mode.
The factory settings are shown in Bold with an asterisk.