User Manual
Table Of Contents
- Product Safety Guide
- Symbols and conventions used in the documentation
- Compilation and Publication Notice
- Choose a safe location for your product
- General precautions
- Connecting the product safely
- Servicing the product
- Product Warranty & Liability
- Approval Information (MFC only)
- Declaration of Conformity (Europe only) (HL-5470DW / HL-6180DW(T) / MFC-8510DN / MFC-8520DN / MFC-8950DW(T) only)
- Declaration of Conformity (Europe only) (HL-5440D / HL-5450DN(T) / DCP-8110DN / DCP-8250DN only)
- IEC60825-1:2007 Specification (For 220-240V Models Only)
- Disconnect device
- Wiring information (U.K. only)
- LAN connection (Network models only)
- Radio interference
- Recycling information in accordance with the WEEE (2002/96/EC) and Battery (2006/66/EC) Directives
- International ENERGY STAR® Qualification Statement
- Trademarks
- Open Source Licensing Remarks
- Copyright and License
- Other Information
- Unlawful use of copying equipment (MFC and DCP only)
15
Wiring information (U.K. only) A
If you need to replace the plug fuse, fit a fuse that is approved by ASTA to BS1362 with the same
rating as the original fuse.
Always replace the fuse cover. Never use a plug that does not have a cover. If in any doubt, call
a qualified electrician.
Warning -This product must be earthed.
The wires in the mains lead are coloured in line with the following code:
Green and Yellow: Earth
Blue: Neutral
Brown: Live
LAN connection (Network models only) A
CAUTION
DO NOT connect this product to a LAN connection that is subject to over-voltages.
Radio interference A
This product complies with EN55022 (CISPR Publication 22)/Class B.