Owner's Manual
Table Of Contents
- About this printer
- What is in the box?
- Positioning the printer
- What kind of paper can I use?
- Printing methods
- Duplex Printing
- Driver and software
- Control panel
- Options
- Routine maintenance
- Troubleshooting
- Appendix
- Appendix (For Europe and Other Countries)
- Appendix (For USA and Canada)
- INDEX
ABOUT THIS PRINTER 1 - 34
2
Pull the paper tray completely out of the printer.
Figure 1-40
3
While pressing the blue paper-guide release levers, slide the paper guides to fit the transparency
size. Check that the guides are firmly in the slots.
Figure 1-41
4
Put transparencies in the tray. Check that the transparencies are flat and below the maximum paper
mark (▼). Do not put more than 10 transparencies in the tray at any one time, or it may cause a jam.
Figure 1-42