Owner's Manual
Table Of Contents
- About this printer
- What is in the box?
- Positioning the printer
- What kind of paper can I use?
- Printing methods
- Duplex Printing
- Driver and software
- Control panel
- Options
- Routine maintenance
- Troubleshooting
- Appendix
- Appendix (For Europe and Other Countries)
- Appendix (For USA and Canada)
- INDEX
ROUTINE MAINTENANCE 5 - 11
6
Put the drum unit assembly in the printer.
Make sure that the printer is turned on, the front cover is open and the Status LED is red.
Figure 5-20
7
Reset the drum counter. See the instructions supplied with the new drum unit.
Caution
■ The Drum LED indication does not disappear until you reset the drum counter.
■ Do not reset the drum counter when you replace only the toner cartridge.
8
Close the front cover.
9
Make sure that the Drum LED is now off.