Owner's Manual
Table Of Contents
- About this printer
- What is in the box?
- Positioning the printer
- What kind of paper can I use?
- Printing methods
- Duplex Printing
- Driver and software
- Control panel
- Options
- Routine maintenance
- Troubleshooting
- Appendix
- Appendix (For Europe and Other Countries)
- Appendix (For USA and Canada)
- INDEX
ROUTINE MAINTENANCE 5 - 9
Replacing the drum unit
Follow these steps to replace the drum unit. You can also view the drum unit replacement method in the
instructional video on the supplied CD-ROM:
1
Press the cover release button and then open the front cover of the printer.
Figure 5-15
2
Pull out the drum unit assembly.
Figure 5-16
Caution
■ We recommend that you place the drum unit assembly on a piece of disposable paper or cloth
in case you accidentally spill or scatter toner.
■ To prevent damage to the printer from static electricity, do not touch the electrodes shown in
Figure 5-17.
Figure 5-17
We recommend that you clean the printer when you replace the drum unit. See Cleaning on page
5-12.