User`s guide

Routine Maintenance
146
4
Cleaning the drum unit 4
If your printout has white or black dots at 94 mm intervals, the drum may have foreign material, such as glue
from a label stuck on the drum surface. Follow the steps below to solve the problem.
a Make sure the machine is in Ready mode.
b Press a or b to choose Machine Info.. Press OK.
c Press a or b to choose Drum Dot Print. Press OK to print the drum dot check sheet.
d Press and hold down to turn the machine off.
e Open the top cover until it locks in the open position.
f The colour of printed dots is the colour of the drum you should clean. Take out the toner cartridge and
drum unit assembly of the colour causing the problem.