User Manual
Table Of Contents
- USER’S GUIDE HL-3045CN HL-3075CW
- Symbols and conventions used in the documentation
- Table of Contents
- 1 Printing Methods
- 2 Driver and Software
- Printer driver
- Features in the printer driver (for Windows®)
- Basic tab
- Paper Size
- Orientation
- Copies
- Media Type
- Print Quality
- Colour/Mono
- Settings Dialog
- Multiple Page
- Manual Duplex / Booklet
- Paper Source
- Advanced tab
- Scaling
- Reverse Print
- Use Watermark
- Header-Footer Print
- Toner Save Mode
- Secure Print
- Administrator
- User Authentication (HL-3075CW only)
- Other Print Options
- Colour Calibration
- Use Reprint
- Sleep Time
- Improve Print Output
- Tray Settings tab
- Support
- Using the custom monochrome printer driver (for Windows®)
- Using the BR-Script3 printer driver (PostScript® 3™ language emulation for Windows®) (HL-3075CW only)
- Features in the printer driver (for Macintosh)
- Features in the printer driver (for Windows®)
- Using the BR-Script3 printer driver (Post Script® 3™ language emulation for Macintosh) (HL-3075CW only)
- Uninstalling the printer driver
- Software
- Printer driver
- 3 Control Panel
- 4 Option
- 5 Routine Maintenance
- 6 Troubleshooting
- Appendix A
- Printer specifications
- Symbol and character sets (HL-3075CW only)
- Quick reference for bar code control commands (HL-3075CW only)
- Print bar codes or expanded characters
- Definition of parameters
- Bar code mode
- Bar code, expanded character, line block drawing and box drawing
- Bar code
- Bar code human readable line ON or OFF
- Quiet zone
- Bar code, expanded character unit, line block drawing and box drawing
- Bar code, expanded character, line block drawing and box drawing offset in X-axis
- Bar code & expanded character offset in Y-axis
- Bar code, expanded character, line block drawing and box drawing height
- Expanded character width, line block drawing and box drawing
- Expanded character rotation
- Bar code data start
- Box drawing
- Line block drawing
- Expanded character data start
- Print bar codes or expanded characters
- Libtiff Copyright and License
- Appendix B (for Europe and Other Countries)
- Appendix C (for USA and Canada)
- Index
Control Panel
89
3
1
On connection to the network, if the machine's 'IP METHOD' is 'AUTO' the machine will attempt to automatically set the IP address and Subnet
Mask from a boot server such as DHCP or BOOTP. If a boot server cannot be found an APIPA IP address will be allocated, such as
169.254.[001-254].[000-255]. If the 'IP METHOD' of the machine is set to 'STATIC' you will need to manually enter an IP address from the
machine's control panel.
WLAN
Status
(Appears only
when WLAN
Enable is
On.)
Status
Signal
Channel
Speed
SSID Shows SSID [uses a maximum
of 32 digits and characters 0-9,
a-z and A-Z in ASCII values]
Comm. Mode Ad-hoc*/Infrastructure Shows the current
Communication Mode.
Set to
Default
Restores wired network settings
of the internal print server to the
factory default.
WLAN
Enable
Off*/On Chooses Ethernet link mode.
Factory
Reset
Restores all network settings of the internal print server to the factory default.
Reset Menu
Display Shows Description
Reset Printer Resets the printer and restores all printer settings (including command settings) to settings
you have previously made with the control panel buttons.
Factory Reset Resets the printer and restores the printer settings (including command settings) to the
factory default settings.
The factory settings are shown in Bold with an asterisk.
Color Correction
Submenu Menu Selections Options Descriptions
Frequency Normal*/Low/Off Sets the interval time you want to
carry out the auto color correction
The factory settings are shown in Bold with an asterisk.
Network for HL-3075CW users (continued)
Submenu 1 Submenu 2 Menu Selections Options Descriptions
The factory settings are shown in Bold with an asterisk.