User Manual
Table Of Contents
- USER’S GUIDE HL-3045CN HL-3075CW
- Symbols and conventions used in the documentation
- Table of Contents
- 1 Printing Methods
- 2 Driver and Software
- Printer driver
- Features in the printer driver (for Windows®)
- Basic tab
- Paper Size
- Orientation
- Copies
- Media Type
- Print Quality
- Colour/Mono
- Settings Dialog
- Multiple Page
- Manual Duplex / Booklet
- Paper Source
- Advanced tab
- Scaling
- Reverse Print
- Use Watermark
- Header-Footer Print
- Toner Save Mode
- Secure Print
- Administrator
- User Authentication (HL-3075CW only)
- Other Print Options
- Colour Calibration
- Use Reprint
- Sleep Time
- Improve Print Output
- Tray Settings tab
- Support
- Using the custom monochrome printer driver (for Windows®)
- Using the BR-Script3 printer driver (PostScript® 3™ language emulation for Windows®) (HL-3075CW only)
- Features in the printer driver (for Macintosh)
- Features in the printer driver (for Windows®)
- Using the BR-Script3 printer driver (Post Script® 3™ language emulation for Macintosh) (HL-3075CW only)
- Uninstalling the printer driver
- Software
- Printer driver
- 3 Control Panel
- 4 Option
- 5 Routine Maintenance
- 6 Troubleshooting
- Appendix A
- Printer specifications
- Symbol and character sets (HL-3075CW only)
- Quick reference for bar code control commands (HL-3075CW only)
- Print bar codes or expanded characters
- Definition of parameters
- Bar code mode
- Bar code, expanded character, line block drawing and box drawing
- Bar code
- Bar code human readable line ON or OFF
- Quiet zone
- Bar code, expanded character unit, line block drawing and box drawing
- Bar code, expanded character, line block drawing and box drawing offset in X-axis
- Bar code & expanded character offset in Y-axis
- Bar code, expanded character, line block drawing and box drawing height
- Expanded character width, line block drawing and box drawing
- Expanded character rotation
- Bar code data start
- Box drawing
- Line block drawing
- Expanded character data start
- Print bar codes or expanded characters
- Libtiff Copyright and License
- Appendix B (for Europe and Other Countries)
- Appendix C (for USA and Canada)
- Index
Control Panel
81
3
Using the control panel LCD menu 3
When you use the Menu keys (+, -, OK or Back), remember the following basic steps:
If no control panel operations are performed for 30 seconds, the LCD automatically returns to Ready.
When you press OK to choose a setting, Accepted appears on the LCD. After that, the LCD returns to
the previous menu level.
When you press Go to choose a setting, Accepted appears on the LCD. After that, the LCD returns to
the Ready state.
After changing the status or a setting, pressing Back before you press OK will cause the LCD to return to
the previous menu level with the original settings unchanged.
There are two ways to input numbers. You can press + or - to scroll up or down one number at a time, or
you can hold down + or - to scroll faster. The blinking number is the one that you can change.
For example: If you want to choose the paper size for Tray 1, as follows. 3
a Press any of the Menu buttons (+, -, OK or Back) to take the printer offline.
Ready
h
Machine Info.
b Press + or - to choose Paper Tray.
Paper Tray
c Press OK to move to the next menu level.
Manual Feed
d Press + or - to choose Tray1 Size.
Tray1 Size
e Press OK to move to the next menu level.
Any l
f Press + or - to choose the paper size.
A4
g Press OK or Go.
Accepted appears on the LCD.
Accepted